| LIGO-Number |
Title |
Author(s) |
Topic(s) |
Last Updated |
| D1001460-v13 |
ISC R1 |
Rich Abbott et al. |
Sensing and Control
Installation
|
28 Aug 2024 |
| D1001425-v9 |
ISC R2 |
Rich Abbott et al. |
Sensing and Control
Conceptual Design
|
28 Aug 2024 |
| D1200196-v15 |
ISC R5 |
Charles Osthelder et al. |
Sensing and Control
Conceptual Design
|
28 Aug 2024 |
| D1101904-v10 |
ISC R4 |
Charles Osthelder et al. |
Sensing and Control
Conceptual Design
|
28 Aug 2024 |
| D1001426-v14 |
ISC R3 |
Rich Abbott et al. |
Sensing and Control
Final Design
|
28 Aug 2024 |
| D1001427-v24 |
ISC C1-C4 (CER Rack Layout) |
Rich Abbott et al. |
Sensing and Control
Conceptual Design
|
28 Aug 2024 |
| D1000342-v18 |
ISC HAM6 Assembly |
Lisa Barsotti |
Sensing and Control
Final Design
|
16 Jul 2015 |
| D0901749-v4 |
3/4" Diameter Optics Post |
Richard Savage |
Input Optics
Operations
Fabrication
Sensing and Control
Conceptual Design
|
27 Feb 2023 |
| T1100068-v23 |
Photon Calibrator Preliminary/Final Design Document |
Jonathan Berliner et al. |
Assembly
Requirements
Calibration
Conceptual Design
Laser Systems
Basic R&D
Detector Characterization
Upgrades
Preliminary Design
Auxiliary Optics
|
06 Jul 2021 |
| D1000669-v5 |
TCS Hartmann Sensor Plate |
Jesper Munch et al. |
Fabrication
Final Design
Conceptual Design
Preliminary Design
Auxiliary Optics
|
01 Feb 2021 |
| D1001530-v7 |
aLIGO ISC Whitening Board |
Rich Abbott |
Sensing and Control
Conceptual Design
|
03 Aug 2020 |
| T040027-v2 |
Conceptual Design of Beamsplitter Suspension for aLIGO |
Norna Robertson et al. |
Conceptual Design
Suspensions
|
14 Mar 2019 |
| T0900144-v7 |
Adv. LIGO Arm Length Stabilization Design |
Sam Waldman et al. |
Sensing and Control
Final Design
|
08 Nov 2018 |
| D1000971-v1 |
ISC TRANSMON BEAM DUMP - SMALL |
Jason Fishner |
Sensing and Control
Conceptual Design
|
15 Nov 2017 |
| D1003319-v4 |
BOBBIN-COIL Assembly, ISC, aLIGO |
Sam Barnum |
Sensing and Control
Conceptual Design
|
26 May 2017 |
| G1601499-v1 |
Elements in the strategy for the future of ground based gravitational wave research |
Rainer Weiss |
Conceptual Design
Detector
|
08 Jul 2016 |
| G1601484-v1 |
Lessons to be learned from the ET design study |
Michele Punturo et al. |
Conceptual Design
|
08 Jul 2016 |
| T1500120-v1 |
Suggested Improvements to SEI / SUS Designs for aLIGO Upgrades |
Jeffrey Kissel et al. |
System Engineering
Commissioning
Sensing and Control
Seismic Isolation
Conceptual Design
Core Optics
Upgrades
Auxiliary Optics
Suspensions
|
26 May 2016 |
| G1600910-v2 |
Historical Context for LIGO’s Detection of Gravitational Waves |
Stan Whitcomb |
Proposals
Conceptual Design
Basic R&D
|
02 May 2016 |
| D1201327-v1 |
Rotate dual suspended seismometer short osc platform iso, Rotate dual suspended seismometer short osc platform iso |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
02 Mar 2016 |
| D1201269-v1 |
Dual suspended seismometer short osc platform iso, Dual suspended seismometer short osc platform iso |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
02 Mar 2016 |
| P1500233-v1 |
Interferometer Techniques for Gravitational-Wave Detection |
Andreas Freise et al. |
Modelling
Input Optics
Sensing and Control
Conceptual Design
Core Optics
Basic R&D
Education, Outreach
Auxiliary Optics
|
18 Nov 2015 |
| T1200178-v3 |
Temperature dependent dissipation in silicon mechanical resonators |
Valery Mitrofanov |
Conceptual Design
|
02 Oct 2015 |
| F1500005-v1 |
Cosmography and Black Hole Spectroscopy by Coherent Synthesis of the Terrestrial and Space GW Antennae Network: Orbit Optimization |
Elvira Kinzina |
Conceptual Design
|
12 Aug 2015 |
| T1500316-v1 |
Magnetic noise from lead glass recoil mass |
Rainer Weiss |
Conceptual Design
Core Optics
|
01 Jul 2015 |
| G1500677-v1 |
Einstein Telescope, interferometer design |
Andreas Freise |
Conceptual Design
|
22 Jun 2015 |
| E990303-v1 |
Seismic Isolation Subsystem Design Requirements Document |
Dennis Coyne et al. |
Requirements
Modelling
Seismic Isolation
Conceptual Design
|
31 Mar 2015 |
| D1001459-v13 |
ISC End Station Remote Rack Layout |
Rich Abbott et al. |
Sensing and Control
Conceptual Design
|
19 Mar 2015 |
| D1102385-v2 |
ETM: Hartmann Sensor Power Supply - PCB |
Stephen O'Connor |
Fabrication
Conceptual Design
Auxiliary Optics
|
10 Mar 2015 |
| T000053-v1 |
aLIGO Universal Suspension Subsystem Design Requirements |
Dennis Coyne |
Conceptual Design
Suspensions
|
08 Mar 2015 |
| D1201234-v1 |
ALS Baseline Top Level Diagram |
Bram Slagmolen |
Sensing and Control
Conceptual Design
|
04 Mar 2015 |
| D1101728-v1 |
PSL Environmental Sensor Concentrator Rear Panel |
Tiana Steckler |
Conceptual Design
|
02 Mar 2015 |
| D1101719-v1 |
PSL Environmental Sensor Concentrator Front Panel |
Tiana Steckler |
Conceptual Design
|
02 Mar 2015 |
| D1101722-v3 |
PSL Environmental Sensor Concentrator D-sub25 Mount |
Tiana Steckler |
Conceptual Design
|
02 Mar 2015 |
| D1001615-v2 |
aLIGO, BSC INSTALLATION ARM, FLANGE BRACE |
Scott Shankle |
Conceptual Design
Auxiliary Optics
|
28 Jan 2015 |
| D1001423-v19 |
ISC End Station Field Rack Layout |
Rich Abbott et al. |
Sensing and Control
Final Design
|
23 Jan 2015 |
| D1100785-v5 |
SUS Nitronic Flat Washers |
Eduardo Sanchez et al. |
Conceptual Design
Preliminary Design
Suspensions
|
22 Jan 2015 |
| D1002042-v1 |
ISC QPD Sled Assembly |
Jason Fishner |
Sensing and Control
Conceptual Design
|
22 Jan 2015 |
| P1500011-v1 |
Mechanical losses of oscillators fabricated in silicon wafers |
Leonid Prokhorov et al. |
Conceptual Design
Upgrades
|
22 Jan 2015 |
| D1100257-v2 |
ISC TransMon Compound Angled Mirror Mount Assembly |
Jason Fishner |
Sensing and Control
Conceptual Design
|
21 Jan 2015 |
| D1100658-v2 |
ISC Rotary Beam Diverter - REED Plate |
Sam Waldman et al. |
Sensing and Control
Conceptual Design
|
21 Jan 2015 |
| D1100656-v2 |
ISC Rotary Beam Diverter - Counter Weight |
Jason Fishner et al. |
Sensing and Control
Conceptual Design
|
21 Jan 2015 |
| D1100646-v1 |
ISC Rotary Beam Diverter - Base Plate |
Jason Fishner et al. |
Sensing and Control
Conceptual Design
|
21 Jan 2015 |
| D1100645-v5 |
ISC Rotary Beam Diverter - Magnet Keeper |
Jason Fishner et al. |
Sensing and Control
Conceptual Design
|
21 Jan 2015 |
| D1100643-v5 |
ISC Rotary Beam Diverter - Rotary Holder |
Jason Fishner et al. |
Sensing and Control
Conceptual Design
|
21 Jan 2015 |
| D1300548-v1 |
Beam Dump, Fast Shutter, HAM6, aLIGO |
Sam Barnum |
Sensing and Control
Conceptual Design
|
19 Jan 2015 |
| D1002834-v2 |
aLIGO Installation, LLO Y-End Station, Cartridge & Cleanroom, Layout |
Brian O'Reilly et al. |
Installation
Conceptual Design
Observatory Facilities
|
14 Jan 2015 |
| T1400028-v2 |
HLTS/HSTS Status update |
Harrison Miller |
Conceptual Design
Basic R&D
Suspensions
|
15 Dec 2014 |
| D1002060-v2 |
ISC Mounting Base - Single |
Jason Fishner |
Sensing and Control
Conceptual Design
|
15 Oct 2014 |
| T1400513-v1 |
Mechanical Quality Factor of Cryogenic Silicon |
Marie Lu et al. |
Sensing and Control
Conceptual Design
Detector Characterization
|
19 Sep 2014 |
| D1000339-v4 |
ISC HAM3 Assembly |
Sam Waldman et al. |
Sensing and Control
Conceptual Design
|
10 Jul 2014 |
| D1001954-v1 |
aLIGO, ASSEMBLY, BSC ARM |
Scott Shankle et al. |
Conceptual Design
Auxiliary Optics
|
13 Jun 2014 |
| E1100071-v11 |
Obsolete |
Stephen O'Connor et al. |
Conceptual Design
|
10 Jun 2014 |
| T1200031-v3 |
LIGO III Strawman Design Workshop Report |
Rana Adhikari et al. |
Conceptual Design
Basic R&D
Detector
Upgrades
|
07 Apr 2014 |
| D1003255-v1 |
ISC Broadband Photo-Detector Enclosure |
Jason Fishner |
Sensing and Control
Conceptual Design
|
01 Apr 2014 |
| T1000321-v5 |
aLIGO ISC Whitening/VGA Module Description |
Rich Abbott |
Sensing and Control
Conceptual Design
|
25 Mar 2014 |
| D1400044-x0 |
ALIGO IO PSL ISS RELOCATION CASE 5 |
Luke Williams |
Input Optics
Conceptual Design
|
06 Feb 2014 |
| D1400043-x0 |
ALIGO IO PSL ISS RELOCATION CASE 3 |
Luke Williams |
Input Optics
Conceptual Design
|
06 Feb 2014 |
| D1400042-x0 |
ALIGO IO PSL ISS RELOCATION CASE 2 |
Luke Williams |
Input Optics
Conceptual Design
|
06 Feb 2014 |
| T1400022-v1 |
Pico Motor Cable Resistance Analysis |
Rich Abbott |
Sensing and Control
Conceptual Design
|
23 Jan 2014 |
| G1300769-v2 |
HAM-ISI Guardian State Evolution |
Brian Lantz et al. |
State Control and Monitoring
Seismic Isolation
Conceptual Design
|
20 Jan 2014 |
| T1300998-v2 |
Reasons to Integrate Control System Design with Mechanical Design for Seismic Isolation and Alignment Systems |
Brett Shapiro et al. |
Conceptual Design
|
12 Dec 2013 |
| D1003325-v2 |
ISC Fast Shutter Hardstop |
Jason Fishner et al. |
Sensing and Control
Conceptual Design
|
03 Dec 2013 |
| D1200105-v2 |
Breadboard OMC aLIGO |
Sam Barnum et al. |
Sensing and Control
Conceptual Design
|
22 Nov 2013 |
| E1300819-v2 |
ISC HAM6 Fast Shutter Hardware Chain |
Rich Abbott et al. |
Sensing and Control
Conceptual Design
|
30 Oct 2013 |
| T1300833-v1 |
Prototype Fast Shutter Measurements |
Rich Abbott |
Sensing and Control
Conceptual Design
|
20 Sep 2013 |
| T1300831-v1 |
SR2 Scraper Baffle sketch |
Michael Smith |
Conceptual Design
Auxiliary Optics
|
18 Sep 2013 |
| D1003295-x0 |
ISC TransMon Periscope Lens Assembly |
Jason Fishner |
Sensing and Control
Conceptual Design
|
16 Aug 2013 |
| D1000441-v2 |
aLIGO INTERMEDIATE WIRE CLAMP ASSY MIDDLE WIRE |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
13 Jul 2013 |
| D1300555-x0 |
Square bottom plate for POD for regular T240 |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
13 Jun 2013 |
| D1300554-x0 |
Square tubing for POD for regular T240 |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
13 Jun 2013 |
| D1300553-x0 |
Square top plate for POD for regular T240 |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
13 Jun 2013 |
| D1300552-x0 |
Square POD for regular T240 |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
13 Jun 2013 |
| D1200035-v1 |
Upper Add-on Mass, 100g (HSTS/OMCS) |
Bobby Moore |
Conceptual Design
Suspensions
|
28 May 2013 |
| D1200040-v1 |
Upper Add-on Mass, 50g (HSTS/OMCS) |
Bobby Moore |
Conceptual Design
Suspensions
|
28 May 2013 |
| D1200043-v1 |
Upper Add-on Mass, 20g (HSTS/OMCS) |
Bobby Moore |
Conceptual Design
Suspensions
|
28 May 2013 |
| D1300289-v2 |
Adapter Plate, HAM Storage Container Conversion, 3rd IFO |
Sam Barnum et al. |
LIGO-India
Conceptual Design
Auxiliary Optics
Suspensions
|
22 May 2013 |
| D1300353-x0 |
Square mass 0.166 kilograms |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
18 Apr 2013 |
| D1300351-v1 |
Wire clamp on the frame |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
18 Apr 2013 |
| D1300301-v1 |
Wire clamp on the frame part 2 |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
18 Apr 2013 |
| D1300352-v2 |
Wire clamp on the frame steel part |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
18 Apr 2013 |
| D1300299-v1 |
Wire clamp on the frame part 1 |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
18 Apr 2013 |
| D1300316-v1 |
Wire clamp on the suspension steel part |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
18 Apr 2013 |
| D1300298-v1 |
Wire clamp on the suspension part 2 |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
18 Apr 2013 |
| D1300297-v1 |
Wire clamp on the suspension part 1 |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
18 Apr 2013 |
| D1300315-v1 |
Wire clamp on the suspension |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
18 Apr 2013 |
| D1300318-v1 |
Square mass 0.628 kilograms |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
04 Apr 2013 |
| D1300317-v1 |
Plate for CG |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
04 Apr 2013 |
| D1300307-v1 |
Round mass for the picomotor 0.104 kilograms |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
04 Apr 2013 |
| D1300293-v1 |
Suspended seismometer platform |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
04 Apr 2013 |
| D1300304-v1 |
Stop for rotation of the suspension |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
04 Apr 2013 |
| D1300303-v1 |
Foot supporting the frame |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
04 Apr 2013 |
| D1300296-v1 |
POD attachment |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
04 Apr 2013 |
| D1300295-v1 |
Picomotor attachment |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
04 Apr 2013 |
| D1300313-x0 |
Wire for suspension |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
03 Apr 2013 |
| D1300312-x0 |
Bar to attach the POD - Aluminum Inch T-Slotted Framing System Four-Slot Single, 1-1/2" Hollow Extrusion, 2.25'' Length |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
03 Apr 2013 |
| D1300311-x0 |
External horizontal bar for left and right - Aluminum Inch T-Slotted Framing System Four-Slot Single, 1-1/2" Hollow Extrusion, 13'' Length |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
03 Apr 2013 |
| D1300310-x0 |
Vertical bar - Aluminum Inch T-Slotted Framing System Four-Slot Single, 1-1/2" Hollow Extrusion, 9.5'' Length |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
03 Apr 2013 |
| D1300309-x0 |
Horizontal bar for front and back - Aluminum Inch T-Slotted Framing System Four-Slot Single, 1-1/2" Hollow Extrusion, 12.5'' Length |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
03 Apr 2013 |
| D1300308-x0 |
Internal horizontal bar for left and right - Aluminum Inch T-Slotted Framing System Four-Slot Single, 1-1/2" Hollow Extrusion, 9'' Length |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
03 Apr 2013 |
| D1300306-v1 |
Round mass 0.333 kilograms |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
03 Apr 2013 |
| D1300305-v1 |
Round mass 0.778 kilograms |
Alix Carbajo et al. |
Seismic Isolation
Conceptual Design
|
03 Apr 2013 |
| D1300288-x0 |
Adapter Plate, HAM Storage Container Conversion, 3rd IFO |
Sam Barnum |
LIGO-India
Seismic Isolation
Conceptual Design
|
28 Mar 2013 |
| D1201328-v1 |
Dual suspended seismometer platform iso, Dual suspended seismometer platform iso |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201326-v1 |
Upper insulation assembly, Rotate dual suspended seismometer short osc platform iso |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201325-v1 |
Upper insulation top, Rotate dual suspended seismometer short osc platform iso |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201324-v1 |
Upper insulation narrow, Rotate dual suspended seismometer short osc platform iso |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201323-v1 |
Upper insulation wide, Rotate dual suspended seismometer short osc platform iso |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201322-v1 |
Lower insulation narrow, Rotate dual suspended seismometer short osc platform iso |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201321-v1 |
Lower insulation wide, Rotate dual suspended seismometer short osc platform iso |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201302-v1 |
Bumper Plate, Rotate dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201270-v1 |
Internal platform, Dual suspended seismometer platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201268-v1 |
Dual suspended seismometer platform, Dual suspended seismometer platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201265-v1 |
Base plate, Dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201264-v1 |
Moving plate, Dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201257-v1 |
Rotate dual suspended seismometer short osc platform, Rotate dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201256-v1 |
External top plate, Dual suspended seismometer platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201255-v1 |
Supporting structure, Rotate dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201254-v1 |
Moving top, Rotate dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201253-v1 |
Base, Rotate dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201241-v1 |
Base plate reinforcing plate, Dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201240-v1 |
Split shaft, Dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201239-v1 |
Side clamp element, Dual suspended seismometer platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201238-v1 |
Bottom clamp, Dual suspended seismometer platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1201237-v1 |
Top clamp, Dual suspended seismometer platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
24 Feb 2013 |
| D1000653-v4 |
TOP LEVEL ISC Equipment Block Diagram |
Rich Abbott et al. |
Sensing and Control
Conceptual Design
|
31 Jan 2013 |
| T1200490-v2 |
LIGO Mailing List Group Configuration |
Warren Anderson |
Conceptual Design
|
01 Nov 2012 |
| D1002225-v4 |
ESD Connector Flex Circuit |
Jack Davis et al. |
Conceptual Design
Auxiliary Optics
|
23 Oct 2012 |
| D1001990-v3 |
Platform Walkway, BSC Installation |
Sam Barnum |
Installation
Seismic Isolation
|
01 Oct 2012 |
| E1200841-x0 |
Rotate dual suspended seismometer short osc platform, Rotate dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
18 Sep 2012 |
| D1201271-x0 |
Supporting structure, Dual suspended seismometer platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
13 Sep 2012 |
| D1201267-x0 |
Moving top, Dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
12 Sep 2012 |
| D1201266-x0 |
Base, Dual suspended seismometer short osc platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
12 Sep 2012 |
| D1201262-x0 |
Bottom clamp assembly, Dual Suspended seismometer platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
12 Sep 2012 |
| D1201261-x0 |
Top clamp assembly, Dual Suspended seismometer platform |
Philipp Knothe et al. |
Seismic Isolation
Conceptual Design
|
12 Sep 2012 |
| G1200937-v2 |
Composite mirror suspensions development status |
Riccardo DeSalvo et al. |
Conceptual Design
Suspensions
|
09 Sep 2012 |
| D1200423-v1 |
ALIGO, Table Extension, Scraper Baffle, HAM4 |
Scott Shankle |
Conceptual Design
|
31 Jul 2012 |
| D1100833-v1 |
ALIGO, OPLEV, PERISCOPE, BSC2-L1 LAYOUT |
Eduardo Sanchez et al. |
Conceptual Design
Auxiliary Optics
|
18 Jul 2012 |
| D1101823-v1 |
aLIGO OPTICAL LEVERS GIRAFFE BASE PLATE |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
18 Jul 2012 |
| D1200108-v1 |
Lower Wire Clamp Base, HSTS |
Bobby Moore |
Conceptual Design
Suspensions
|
18 Jun 2012 |
| D1200422-v1 |
ALIGO, Assy,Table Extension, Scraper Baffle, HAM4 |
Scott Shankle |
Conceptual Design
|
15 Jun 2012 |
| D1200424-v1 |
ALIGO, Table Ext, Support Arm HAM4 |
Scott Shankle |
Conceptual Design
|
15 Jun 2012 |
| D1200425-v1 |
ALIGO, Table Extension, Adapter Plate |
Scott Shankle |
Conceptual Design
|
15 Jun 2012 |
| D1200882-v1 |
Septum Viewport Protector for back of vacuum sealing surface |
Gerardo Moreno et al. |
Conceptual Design
Vacuum
|
14 Jun 2012 |
| D1000395-v2 |
aLIGO INTERMEDIATE TOP MASS SPACER |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
01 May 2012 |
| T1200188-v1 |
ETM Transmission Monitor Telescope Performance |
Michael Smith |
Conceptual Design
Auxiliary Optics
|
26 Apr 2012 |
| T1200175-v1 |
bLCGT TM Wide Angle Baffle, Manifold Baffle, and Beam Tube Baffle Conceptual Design |
Michael Smith |
Conceptual Design
Auxiliary Optics
|
18 Apr 2012 |
| T1200176-v1 |
bLCGT Recycling Cavity Baffles Conceptual Design |
Michael Smith |
Conceptual Design
Auxiliary Optics
|
18 Apr 2012 |
| E1200391-v1 |
bLCGT Cavity Lengths |
Michael Smith |
Conceptual Design
Auxiliary Optics
|
18 Apr 2012 |
| D1000410-v3 |
aLIGO_BOSEMS_INTERMIDIATE_SUPPORT_LEFT_SIDE_TRAY |
Craig Conley |
Auxiliary Optics
Suspensions
|
12 Apr 2012 |
| E080462-v1 |
Infrasonic Microphone and PEM++ |
Gabor Szeifert et al. |
Data and Computing
Other data analysis
Requirements
Data Acquisition System
Fabrication
Sensing and Control
Calibration
Conceptual Design
System Test
Data quality / vetoes
Basic R&D
Computing/archiving
Integration
Upgrades
Preliminary Design
Observatory Facilities
|
01 Apr 2012 |
| D1001973-v3 |
aLIGO TMS FOCUS SCREW |
Michael Miller et al. |
Fabrication
Final Design
Auxiliary Optics
|
29 Mar 2012 |
| D1200448-v1 |
Septum Viewport Protector |
Michael Meyer |
Conceptual Design
Vacuum
|
21 Mar 2012 |
| D1000409-v3 |
aLIGO_BOSEMS_INTERMIDIATE_SUPPORT_RIGHT_SIDE_TRAY |
Craig Conley |
Auxiliary Optics
Suspensions
|
13 Mar 2012 |
| D1000408-v3 |
aLIGO_BOSEMS_INTERMIDIATE_SUPPORT_LEFT_SIDE_BRACKET |
Craig Conley |
Auxiliary Optics
|
13 Mar 2012 |
| D1000407-v3 |
aLIGO_OSEMS_INTERMIDIATE_SUPPORT_RIGHT_SIDE_BRACKET |
Craig Conley |
Auxiliary Optics
|
13 Mar 2012 |
| T0900508-v1 |
LLO OMC Mode Matching |
Katherine Dooley |
Commissioning
Modelling
Conceptual Design
Auxiliary Optics
|
23 Feb 2012 |
| D0901058-v1 |
AdLIGO AOS SLC Fold Mirror Beam Dump Final Assy |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
08 Feb 2012 |
| D1000444-v1 |
aLIGO INTERMEDIATE MASS TOP ASSY WITH ADDED MASS(22kg), FIRST ARTICLE |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
08 Feb 2012 |
| E1101095-v4 |
Advanced LIGO Output Mode Cleaner Coating Specifications |
Sam Waldman et al. |
Sensing and Control
Conceptual Design
|
31 Jan 2012 |
| D1102113-v1 |
aLIGO Linear Motor Top Plate |
Sam Waldman |
Sensing and Control
Conceptual Design
|
31 Oct 2011 |
| D1000393-v2 |
aLIGO INTERMEDIATE MASS TOP PLATE |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
06 Oct 2011 |
| D1001617-v1 |
aLIGO, BSC REPAIR ARM, ASSEMBLY, FLANGE MOUNT |
Scott Shankle |
Conceptual Design
Auxiliary Optics
|
28 Sep 2011 |
| D1001834-v3 |
aLIGO TMS HOLDER SEC. FOCUS |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
08 Sep 2011 |
| D1000632-v2 |
aLIGO TOP ADD MASS BAR |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
01 Sep 2011 |
| D1001600-v3 |
aLIGO_TMS_Tele._Sec._Mirror_Mt._Assem. |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
18 Aug 2011 |
| D1000656-v2 |
aLIGO TOP ADD MASS SIDE SLOTTED BAR |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
12 Aug 2011 |
| D1000655-v2 |
aLIGO TOP ADD MASS TOP SLOTTED BAR |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
12 Aug 2011 |
| D1001987-v3 |
aLIGO TMS VERT.-HOR. SCREW |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
02 Aug 2011 |
| D1000633-v3 |
aLIGO TOP ADD MASS TEE |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
28 Jul 2011 |
| D1000394-v2 |
aLIGO INTERMEDIATE MASS BOTTOM PLATE |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
13 Jul 2011 |
| D1000631-v3 |
aLIGO TOP ADD MASS TOWER |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
30 Jun 2011 |
| D1002926-v2 |
Module-E, BSC Cartridge installation, aLIGO |
Sam Barnum et al. |
Installation
Observatory Facilities
|
15 Jun 2011 |
| T010103-v1 |
aLIGO Suspension System Conceptual Design |
Russell Jones et al. |
Conceptual Design
Suspensions
|
09 Jun 2011 |
| M060056-v2 |
Advanced LIGO Reference Design |
David Shoemaker |
Conceptual Design
Reports
Detector
|
08 May 2011 |
| D1001996-v1 |
aLIGO, HAM INSTALLATION ARM, FLANGE MOUNT |
Scott Shankle |
Conceptual Design
Auxiliary Optics
|
04 Apr 2011 |
| D1001997-v1 |
aLIGO, HAM INSTALLATION, STRIKE PLATE |
Scott Shankle |
Conceptual Design
Auxiliary Optics
|
04 Apr 2011 |
| D1001344-v2 |
aLIGO, CABLE BRACKET SCREW INSULATOR |
Scott Shankle |
Conceptual Design
Auxiliary Optics
|
02 Mar 2011 |
| D1001345-v3 |
aLIGO, CABLE BRACKET, NUTPLATE |
Scott Shankle |
Conceptual Design
Auxiliary Optics
|
02 Mar 2011 |
| D1000729-v3 |
TCS Hartmann Sensor Camera Heat Spreader |
Mindy Jacobson et al. |
Preliminary Design
Auxiliary Optics
|
28 Feb 2011 |
| D1000736-v2 |
TCS Hartmann Sensor Camera Heat Sink |
Mindy Jacobson et al. |
Preliminary Design
Auxiliary Optics
|
28 Feb 2011 |
| D1100328-v1 |
FM/BS Removal Tool - FM /BS Summit |
Scott Shankle |
Conceptual Design
|
22 Feb 2011 |
| D0900644-v8 |
Advanced LIGO ISC Component Locations |
Rich Abbott |
System Engineering
Conceptual Design
|
18 Feb 2011 |
| D1001343-v3 |
aLIGO, CABLE BRACKET, UPRIGHT |
Scott Shankle |
Conceptual Design
Auxiliary Optics
|
18 Feb 2011 |
| T080184-v2 |
A Color Coding System for Mechanical Models |
Derek Bridges |
System Engineering
Modelling
Final Design
Conceptual Design
Preliminary Design
|
18 Jan 2011 |
| D1001976-v1 |
aLIGO, BSC INSTALLATION, STRIKE PLATE |
Scott Shankle |
Conceptual Design
Auxiliary Optics
|
22 Dec 2010 |
| D1001616-v1 |
aLIGO, BSC INSTALLATION ARM, FLANGE MOUNT |
Scott Shankle |
Conceptual Design
Auxiliary Optics
|
22 Dec 2010 |
| E1000601-v2 |
aLIGO Optical Lever Coordinates, H1 |
Ignacio Romero et al. |
Final Design
Auxiliary Optics
|
16 Dec 2010 |
| E1000607-v2 |
aLIGO Optical Lever Coordinates, H2 |
Ignacio Romero et al. |
Final Design
Auxiliary Optics
|
16 Dec 2010 |
| D1001841-v3 |
aLIGO TMS FOCUS SLIDE LOCK |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
12 Nov 2010 |
| E1000318-v1 |
DCN: Initial Release of 1st Article TMS Secondary Mirror Parts and Assembly |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
01 Nov 2010 |
| D1001813-v2 |
aLIGO TMS THREAD MT. SEC. FOCUS |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
01 Nov 2010 |
| D1001833-v2 |
a LIGO TMS HOR. SLIDE SEC. |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
01 Nov 2010 |
| D1001832-v2 |
aLIGO TMS VERT. SLIDE SEC. BRK. |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
01 Nov 2010 |
| D1001839-v2 |
aLIGO TMS HOR. LOCK |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
01 Nov 2010 |
| D1001837-v2 |
aLIGO TMS VERTICAL LOCK |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
01 Nov 2010 |
| D1001835-v2 |
aLIGO TMS ACROSS THREAD MT. |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
01 Nov 2010 |
| E1000398-v1 |
Thin Film Polarizer for Advanced LIGO Output Faraday Isolator |
Rodica Martin |
Conceptual Design
Auxiliary Optics
|
26 Oct 2010 |
| D1001803-v1 |
aLIGO SUS CO2 Laser Machine Welding Galvo Box_Side Wall 2 |
Russell Jones |
Conceptual Design
Suspensions
|
06 Oct 2010 |
| D1000682-v2 |
TCS Glass Rod Insulator for Ring Heater |
Mindy Jacobson et al. |
Final Design
Conceptual Design
Preliminary Design
Auxiliary Optics
|
10 Aug 2010 |
| D1001653-v1 |
TORQUE TESTING PLATE - SS |
Richard Biedenharn |
Conceptual Design
Suspensions
|
07 Jul 2010 |
| D1001654-v1 |
TORQUE TESTING PLATE - ALUM |
Richard Biedenharn |
Conceptual Design
Suspensions
|
07 Jul 2010 |
| G1000606-v1 |
aLIGO Binary Input and Output Interface |
Rich Abbott |
Conceptual Design
|
08 Jun 2010 |
| D1000546-x0 |
aLIGO_CENTER_SUPPORT_BRIDGE_FOR_THE_TELESCOPE_AND_TABLE |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
10 Mar 2010 |
| D1000545-x0 |
aLIGO_TransMon_ Wire_Attachment_Plate |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
10 Mar 2010 |
| D1000544-x0 |
aLIGO_TransMon_Music_Wire_Adj_Brkt |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
10 Mar 2010 |
| D1000543-x0 |
aLIGO_TransMon_Music_Wire_Split_Clamp_CS |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
10 Mar 2010 |
| D1000542-x0 |
CENTER_SUPPORT_BRIDGE_FOR THE TELESCOPE AND TABLE_ASSEMBLY. |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
10 Mar 2010 |
| D060102-v1 |
aLIGO ETM and ITM SUS Recycling Mirror Envelope |
Calum Torrie |
Conceptual Design
Suspensions
|
28 Feb 2010 |
| D1000440-v1 |
aLIGO ISC Whitening Filter Block Diagram |
Rich Abbott |
Sensing and Control
Conceptual Design
|
26 Feb 2010 |
| T0900637-v1 |
Fan Gasket for LLO Rack 6 |
David Kinzel |
Conceptual Design
Observatory Facilities
|
16 Dec 2009 |
| E0900421-v1 |
LAYOUT SHOWING THE ELEMENTS OF THE TRANSMON SUS |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
18 Nov 2009 |
| T070063-v1 |
PZT Driver Quick Start Guide |
Rich Abbott |
Conceptual Design
|
28 Oct 2009 |
| G0900960-v1 |
How to Build a Gravitational-wave Detector |
Stan Whitcomb |
Conceptual Design
|
26 Oct 2009 |
| G0900577-v3 |
Arm Length Stabilization for Advanced Gravitational Wave Detectors |
Daniel Shaddock et al. |
Sensing and Control
Conceptual Design
|
11 Oct 2009 |
| T070247-v1 |
AdvLIGO Interferometer Sensing and Control Conceptual Design |
Peter Fritschel |
Sensing and Control
Conceptual Design
|
14 Sep 2009 |
| E080166-v1 |
HAM Crossbeam Redesign for Advanced LIGO: FEA Study |
Andy Stein |
Seismic Isolation
Conceptual Design
|
03 Sep 2009 |
| D0901341-x0 |
ADVL_MANIFOLD_CRYO_BAFFLE |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
01 Jul 2009 |
| D0900823-x0 |
Blade Characterization Stand - Table (Reference Only) |
Michael Meyer |
Conceptual Design
Suspensions
|
15 Jun 2009 |
| D0901244-x0 |
Blade Characterization Stand - Wheel Carriage |
Michael Meyer |
Conceptual Design
Suspensions
|
15 Jun 2009 |
| D0901190-x0 |
PR3__ELLIPTICAL_BAFFLE_FORM |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
09 Jun 2009 |
| D0901158-x0 |
A-1_ADAPTOR_ADLIGO_VE |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
03 Jun 2009 |
| D0901059-x0 |
BSC7-8_APERTURE |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
22 May 2009 |
| D0901046-x0 |
AdvLIGO SYSTEMS_BSC2_ITMY_ELLIPTICAL_BAFFLE_CLAMP_HOLE_TRANSFER_PL |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
20 May 2009 |
| D0900095-v1 |
ELIGO_35_WATT_AIR_COOLED_BEAM_DUMP_3INCH_P.POL |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
20 May 2009 |
| D0901035-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_RETAINER |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901034-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_PIN |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901033-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_WASHER |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901032-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_CLAMP |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901031-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_O'RING |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901030-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_TUBE |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901029-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_FOOT |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901028-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_BLOCK |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901027-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_FRAME |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901024-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_ASSEMBLY |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0900321-v1 |
ELIGO_35_WATT_HEAT_SINK_BODY |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
13 May 2009 |
| G0900323-v2 |
Kick-off Meeting Stage 0 Redesign- Presentation |
Celine Ramet |
Conceptual Design
|
07 May 2009 |
| E0900104-v3 |
BSC-ISI Design, Stage1 Kick off meeting notes |
Fabrice Matichard |
Conceptual Design
|
22 Apr 2009 |
| G0900293-v3 |
Transmon sensitivity calculations |
Sam Waldman |
Sensing and Control
Conceptual Design
Auxiliary Optics
|
22 Apr 2009 |
| G0900292-v2 |
BSC ISI Flexure Attachment Kick-Off Meeting |
Ken Mason |
Seismic Isolation
Conceptual Design
|
16 Apr 2009 |
| T0900120-v2 |
Dynamics of the Damper Suspension for the ETM Transmission Telescope/Monitor |
Dennis Coyne |
Conceptual Design
Auxiliary Optics
|
30 Mar 2009 |
| T080308-v1 |
IAS Conceptual Design Document |
Michael Smith |
Conceptual Design
Auxiliary Optics
|
17 Mar 2009 |
| T070035-v1 |
UK Coil Driver Reviewer Comments Summary |
Vernon Sandberg et al. |
Conceptual Design
Suspensions
|
13 Mar 2009 |
| T0810032-v1 |
ETM Transmon Pupil Relay |
Michael Smith |
Sensing and Control
Conceptual Design
Auxiliary Optics
|
24 Feb 2009 |