Document List by Author

Derek Bridges of LIGO - Livingston Observatory is listed as an author on the following documents:

LIGO-Number Title Author(s) Topic(s) Last Updated
D060218-v2 BOSEM Betsy Weaver et al. Preliminary Design
Suspensions
28 Jul 2020
E1100108-v1 Beamsplitter/Folding Mirror Controls Arrangement Poster Derek Bridges Assembly
Suspensions
Subsystem Test
14 Feb 2012
D070441-v6 HLTS Prism Breakoff, Lower Wire, Optic Calum Torrie et al. Final Design
Suspensions
14 Nov 2023
D1001695-v2 Magnet and Flag Assembly, BOSEM, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
E1200482-x0 aLIGO, SUS Derek Bridges Suspensions
07 Jun 2023
E1000495-x0 aLIGO SUS QUAD Testing and Commissioning Documentation Derek Bridges et al. Assembly
Commissioning
Suspensions
Subsystem Test
29 Mar 2023
D060546-v1 Impact Absorber for Glass Stops, Earthquake Stop Derek Bridges Preliminary Design
Suspensions
15 May 2009
D0900295-v8 aLIGO OMCS Overall Assembly Derek Bridges Final Design
Suspensions
02 Oct 2019
D070447-v2 HLTS Overall Assembly Derek Bridges Final Design
Suspensions
31 Oct 2022
E030518-v22 HSTS Assembly Procedure Janeen Romie et al. Assembly
Suspensions
07 Mar 2013
E1100287-x0 HSTS Assembly Process Travelers Derek Bridges Assembly
Suspensions
29 Nov 2021
D060502-v4 (Top) Upper Mass Assembly (OMCS) Derek Bridges Final Design
Suspensions
23 Sep 2021
T0900559-v26 HLTS/HSTS/OMCS Blade Pairings Norna Robertson et al. Final Design
Suspensions
08 Mar 2015
D1200539-v1 Mounting Bracket Vertical Section, Coil Holder, HSTS Derek Bridges Final Design
Suspensions
30 Mar 2012
D0900906-v1 Earthquake Stop Adjuster and Mount, 2 Inch Derek Bridges Preliminary Design
Suspensions
03 Oct 2019
E1100109-v2 (HLTS, HSTS, OMCS) HAM Suspensions Controls Arrangement Poster Derek Bridges Assembly
Suspensions
Subsystem Test
13 Nov 2017
E1000617-v6 (QUAD) Quadruple Suspension Controls Arrangement Poster Derek Bridges Assembly
Suspensions
Subsystem Test
13 Nov 2017
E1200812-x0 Table of Rounded-End SHCS Derek Bridges Final Design
System Engineering
25 Apr 2017
D060545-v2 Earthquake Stop Adjuster Joe ODell et al. Final Design
Suspensions
05 Oct 2010
E1100286-x0 HLTS Assembly Process Travelers Derek Bridges Assembly
Suspensions
20 Jul 2016
E1200343-v96 OSEM Chart Stuart Aston et al. Assembly
Suspensions
Subsystem Test
22 Oct 2015
E1000036-v38 SUS Drawing Tracker Bobby Moore et al. Reports
Suspensions
17 Apr 2015
D1201212-v3 Suspended Mass Assembly (OMCS) Derek Bridges Final Design
Suspensions
30 Mar 2015
E1000232-v1 HLTS Prototype Adjustment Test Results Derek Bridges Reports
Preliminary Design
Suspensions
08 Mar 2015
E1000169-v20 SUS HAM Production Blades - Characterization Spreadsheet Janeen Romie et al. Fabrication
Suspensions
08 Mar 2015
T080117-v10 Output Mode Cleaner Suspension (OMCS) Assembly Procedure Janeen Romie et al. Assembly
Final Design
Suspensions
08 Mar 2015
E1000434-x0 aLIGO SUS OMCS Testing and Commissioning Documentation Derek Bridges Suspensions
Subsystem Test
08 Mar 2015
D0900932-v1 Earthquake Stop for Glass (Glass Tip), Simplified, 2 Inch Derek Bridges Preliminary Design
Suspensions
02 Mar 2015
E1000521-x0 aLIGO SUS Quad Suspension Monolithic Build Test Reports Derek Bridges et al. Reports
Suspensions
Subsystem Test
01 Feb 2015
E1000517-x0 aLIGO SUS Quad Suspension Metal Build Test Reports Derek Bridges et al. Reports
Suspensions
Subsystem Test
01 Feb 2015
E1000496-x0 aLIGO SUS BSFM Testing and Commissioning Documentation Derek Bridges et al. Assembly
Commissioning
Suspensions
Subsystem Test
25 Nov 2014
D060416-v4 Magnet and Flag Assembly Derek Bridges et al. Preliminary Design
Suspensions
05 May 2014
E1300429-x0 aLIGO SUS OMCS Assembly and Installation Documentation Derek Bridges Assembly
Suspensions
Installation
20 Mar 2014
E080208-v15 HLTS Assembly Procedure Derek Bridges et al. Assembly
Suspensions
09 Apr 2013
E1100472-x0 aLIGO SUS HLTS Assembly and Installation Documentation Derek Bridges et al. Assembly
Suspensions
Installation
14 Mar 2014
E080329-v3 HLTS Bill of Materials Derek Bridges Final Design
Suspensions
26 Feb 2014
D1001698-v1 Magnet Flag, BOSEM - OBSOLETE Derek Bridges Final Design
Suspensions
26 Feb 2014
D0900293-v2 OMCS Overall Assembly with Fixtures Derek Bridges Final Design
Suspensions
25 Feb 2014
T0900060-v2 OMC Suspension Final Design Document Jay Heefner et al. Final Design
Suspensions
20 Feb 2014
T1000012-v6 HAM Large Triple Suspension (HLTS) Final Design Document Norna Robertson et al. Final Design
Suspensions
17 Oct 2013
E1300480-v2 Software Manual for the Vacuum System Toolbox Derek Bridges Modelling
Vacuum
04 Oct 2013
E1300610-v2 Bibliography for Vacuum System Toolbox Derek Bridges Data analysis software
Vacuum
04 Oct 2013
G1300952-v1 aLIGO Output Mode Cleaner: Design, Fabrication, and Installation Rich Abbott et al. Sensing and Control
Final Design
Fabrication
Installation
20 Sep 2013
D080125-x0 Advanced LIGO, SUS, Output Mode Cleaner (LHO) Derek Bridges Final Design
Suspensions
16 Sep 2013
T1000003-v4 Beamsplitter/Folding Mirror Materials List Joe ODell et al. Final Design
Suspensions
02 Jul 2013
E1300132-v2 ECR - Reworks to OMCS Parts Derek Bridges Final Design
Change Control
Suspensions
01 Jun 2013
E1300085-x0 DCN - Updated OMCS Part and Assembly Drawings Derek Bridges Final Design
Change Control
Suspensions
01 Jun 2013
D070146-v1 Blade Guard Crosspiece (OMCS) Derek Bridges Suspensions
28 May 2013
D020133-v1 Lower Blade Wire Clamp Plate (OMCS) Derek Bridges Final Design
Suspensions
28 May 2013
D020132-v2 Lower Blade Wire Clamp (HSTS/OMCS) Bobby Moore Final Design
Suspensions
28 May 2013
D070020-v2 Magnet Holder (OMCS) Derek Bridges Preliminary Design
Suspensions
28 May 2013
D060503-v1 Pitch Insert, T-Section, Upper Mass (OMCS) Derek Bridges Suspensions
Basic R&D
28 May 2013
D060491-v2 Main Section, Upper Mass (OMCS) Derek Bridges Final Design
Suspensions
28 May 2013
D020308-v2 Lower Blade Clamp, Lower Side, 0.0 Degree (HSTS/OMCS) Derek Bridges Final Design
Suspensions
22 May 2013
D030466-v2 Upper Blade Clamp, Lower Side, 3.5 Degree (HSTS/OMCS) Bobby Moore Final Design
Suspensions
22 May 2013
D030465-v2 Upper Blade Clamp, Lower Side, 3.0 Degree (HSTS/OMCS) Bobby Moore Final Design
Suspensions
22 May 2013
D030463-v2 Upper Blade Clamp, Lower Side, 2.0 Degree (HSTS/OMCS) Bobby Moore Final Design
Suspensions
22 May 2013
D030462-v2 Upper Blade Clamp, Lower Side, 1.5 Degree (HSTS/OMCS) Bobby Moore Final Design
Suspensions
22 May 2013
D030461-v2 Upper Blade Clamp, Lower Side, 1.0 Degree (HSTS/OMCS) Bobby Moore Final Design
Suspensions
22 May 2013
D030460-v2 Upper Blade Clamp, Lower Side, 0.5 Degree (HSTS/OMCS) Bobby Moore Final Design
Suspensions
22 May 2013
D030459-v3 Upper Blade Clamp, Lower Side, 0.0 Degree (HSTS/OMCS) Bobby Moore Final Design
Suspensions
22 May 2013
D030464-v2 Upper Blade Clamp, Lower Side, 2.5 Degree (HSTS/OMCS) Bobby Moore Final Design
Suspensions
22 May 2013
D020690-v2 Upper Blade Clamp, Upper Side, 3.5 Degree (HSTS/OMCS) Bobby Moore Final Design
Suspensions
21 May 2013
D020689-v2 Upper Blade Clamp, Upper Side, 3.0 Degree (HSTS/OMCS) Bobby Moore Final Design
Suspensions
21 May 2013
E0900061-v3 OMCS Bill of Materials Derek Bridges Final Design
Suspensions
16 May 2013
D060533-v1 Mounting Bracket, Coil Holder (OMCS) Derek Bridges Final Design
Suspensions
14 May 2013
D1201213-v1 Coil Holder Assembly (OMCS) Derek Bridges Final Design
Suspensions
14 May 2013
D070145-v3 Top Blade Guard Assembly (OMCS) Derek Bridges Final Design
Suspensions
14 May 2013
D070035-v4 Metal Bench Assembly (OMCS) Derek Bridges Sensing and Control
Suspensions
14 May 2013
D060537-v4 Lower Wire Assembly (OMCS) Derek Bridges Suspensions
14 May 2013
D030451-v2 Rotational Adjuster Assembly (OMCS) Derek Bridges Final Design
Suspensions
14 May 2013
E080191-v1 HLTS Drawing Tree Derek Bridges Preliminary Design
Suspensions
13 May 2013
D1300367-v1 Transport Handle Assembly (OMCS) Derek Bridges et al. Final Design
Suspensions
Installation
13 May 2013
D1201488-v2 Lower Clamp Mount, Lower Wire Jig (OMCS) Derek Bridges Final Design
Suspensions
17 Apr 2013
D1201490-v1 Lower Blade Wire Clamp Spacer, Lower Wire Jig (OMCS) Derek Bridges Final Design
Suspensions
17 Apr 2013
D1201486-v1 Wire Start Clamp, Inside, Lower Wire Jig (OMCS) Derek Bridges Final Design
Suspensions
17 Apr 2013
D070250-v4 Base Plate, Lower Wire Jig (OMCS) Derek Bridges Final Design
Suspensions
17 Apr 2013
D070249-v2 Lower Wire Jig Assembly (OMCS) Derek Bridges Final Design
Suspensions
17 Apr 2013
D0900655-v3 Structural Weldment Assembly (OMCS) Derek Bridges et al. Final Design
Suspensions
16 Apr 2013
T1100003-v7 Building Suspension Subassemblies in ICS Dwayne Giardina et al. Assembly
Suspensions
16 Apr 2013
E1200254-v3 Tolerances for Height Measurements of the HAM Suspensions During Assembly Derek Bridges Assembly
Modelling
Suspensions
12 Mar 2013
D1201215-v1 Side Earthquake Stop Assembly, Optical Bench, OMCS Derek Bridges Final Design
Suspensions
27 Feb 2013
D1201214-v1 Upper Earthquake Stop Assembly, Optical Bench, OMCS Derek Bridges Final Design
Suspensions
27 Feb 2013
D1201216-v1 Lower Earthquake Stop Assembly, Optical Bench, OMCS Derek Bridges Final Design
Suspensions
27 Feb 2013
E1201116-v2 ECR - Replace HSTS Lower Blade Stops Derek Bridges et al. Final Design
Change Control
Suspensions
Installation
22 Feb 2013
E1300096-x0 DCN - Updated OMCS Lower Wire and Lower Wire Jig Derek Bridges Final Design
Change Control
Suspensions
01 Feb 2013
E1300019-x0 DCN - Revision of D1201488 Derek Bridges Final Design
Change Control
Suspensions
09 Jan 2013
E1201122-x0 DCN - HSTS Upper Mass - Rounded-End SHCS Blade Stops Derek Bridges Final Design
Change Control
Suspensions
19 Dec 2012
D0900980-v1 Screw, Socket Head Cap, #4-40 UNC-3A X 0.375 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
19 Dec 2012
E1201117-x0 ECR - Revised Method for Flattening HLTS Upper Blades Derek Bridges Assembly
Change Control
Suspensions
18 Dec 2012
D1201563-x0 Pulldown Bar, Upper Blade, HLTS Derek Bridges Assembly
Final Design
Suspensions
18 Dec 2012
E1201057-x0 DCN - OMC Suspension Lower Wire and Jig Derek Bridges Final Design
Suspensions
28 Nov 2012
D1201487-x0 Wire Start Clamp, Inside, Upper Wire Jig, OMC Derek Bridges Final Design
Suspensions
27 Nov 2012
E1201024-x0 aLIGO SUS HSTS Glass Build Tooling Derek Bridges Assembly
Suspensions
15 Nov 2012
E1201023-x0 aLIGO SUS HLTS Glass Build Tooling Derek Bridges Assembly
Suspensions
15 Nov 2012
D1002824-v1 Earthquake Stop Bracket Side, Lower, Bottom Mass, HLTS Derek Bridges Final Design
Suspensions
04 Nov 2012
D1002823-v1 Earthquake Stop Bracket Back, Lower, Bottom Mass, HLTS Derek Bridges Final Design
Suspensions
04 Nov 2012
D1002822-v1 Earthquake Stop Bracket Assembly, Lower, Bottom Mass, HLTS Derek Bridges Final Design
Suspensions
04 Nov 2012
D080728-v2 Earthquake Stop Assembly, Upper, Bottom Mass, HLTS Derek Bridges Preliminary Design
Suspensions
02 Nov 2012
D1002821-v2 Earthquake Stop Assembly, Lower, Bottom Mass, HLTS Derek Bridges Final Design
Suspensions
02 Nov 2012
E1200887-x0 DCN - Updated Dimensions of HLTS/HSTS Bottom Masses Derek Bridges Final Design
Suspensions
23 Oct 2012
E1000520-x0 aLIGO SUS Quad Suspension Monolithic Build Testing Procedure Derek Bridges et al. Suspensions
Subsystem Test
17 Oct 2012
D070337-v8 Bottom Mass Assembly, HLTS Derek Bridges Final Design
Suspensions
09 Oct 2012
E1200801-x0 DCN - aLIGO Output Mode Cleaner Suspension Assemblies Derek Bridges Final Design
Suspensions
26 Sep 2012
D070068-v1 C-Spacer, OMC Derek Bridges Suspensions
25 Sep 2012
D1100042-x0 Reaction Chain Wire Assemblies, Quad Suspension Derek Bridges Final Design
Suspensions
11 Sep 2012
D1100041-x0 Main Chain Wire Assemblies, Quad Suspension Derek Bridges Final Design
Suspensions
11 Sep 2012
D030025-v1 Screw, Socket Head Cap, #8-32 UNC-2A X 1 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Fabrication
System Engineering
09 Sep 2012
D1001794-v2 BOSEM, Magnet (10mm X 10mm) and Flag Arrangement Derek Bridges et al. Final Design
Suspensions
30 Aug 2012
D0901020-v1 Screw, Socket Head Cap, 1/4-20 UNC-2A X 2 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
26 Aug 2012
E1200766-v5 LLO Cable Inventory Derek Bridges Installation
System Engineering
24 Aug 2012
E1200767-x0 BS/FM Bill of Materials Derek Bridges et al. Final Design
Suspensions
15 Aug 2012
D1102086-v1 Lower Loop Wire Comb, HSTS Derek Bridges Final Design
Suspensions
25 Jun 2012
F1200009-v1 HSTS Mass and Balance Measurement Template Derek Bridges Assembly
Suspensions
14 Jun 2012
E1200542-x0 DCN - Updates for Production HLTS Derek Bridges Change Control
Suspensions
04 Jun 2012
D0902025-v3 Upper AOSEM Mounting Bracket, Intermediate Mass, HLTS Derek Bridges Preliminary Design
Suspensions
04 Jun 2012
D0901493-v3 Lower AOSEM Mounting Bracket, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
04 Jun 2012
D070442-v7 Structural Weldment, HLTS Derek Bridges et al. Final Design
Suspensions
29 May 2012
D0902722-v4 Sapphire Prism Holder Extension Derek Bridges Final Design
Suspensions
30 Apr 2012
D0902664-v3 Sapphire Prism Holder, HLTS Derek Bridges Final Design
Suspensions
30 Apr 2012
D0902663-v3 Sapphire Prism Holder Assembly, HLTS Derek Bridges Final Design
Suspensions
30 Apr 2012
D0902666-v3 Bonding Template Side, Sapphire Prism, HLTS Derek Bridges Final Design
Suspensions
30 Apr 2012
E1200330-x0 DCN - Revised HSTS Tablecloth Brackets Derek Bridges Final Design
Change Control
Suspensions
03 Apr 2012
D0902444-v2 HLTS Positioning Standoff, Intermediate Magnet Placement Fixture Derek Bridges Final Design
Suspensions
03 Apr 2012
D0902451-v1 HLTS Standoff Side Plate, Long, Intermediate Mass Magnet Placement Fixture Derek Bridges Preliminary Design
Suspensions
03 Apr 2012
D070321-v2 Earthquake Stop Bridge Crossbar, HLTS Derek Bridges Final Design
Suspensions
02 Apr 2012
E080493-v2 Output Mode Cleaner (OMC) As-Built Description Derek Bridges et al. Suspensions
Basic R&D
01 Apr 2012
D1200536-v1 Mounting Bracket, Coil Holder, HSTS Derek Bridges Final Design
Suspensions
30 Mar 2012
D1200537-v1 Mounting Bracket Lateral Section, Coil Holder, HSTS Derek Bridges Final Design
Suspensions
30 Mar 2012
D1200538-v1 Mounting Bracket Longitudinal Section, Coil Holder, HSTS Derek Bridges Final Design
Suspensions
30 Mar 2012
D1101791-v1 Lower Loop Wire Comb, HLTS Derek Bridges Final Design
Suspensions
27 Mar 2012
D0901419-v2 Lower Loop Wire Jig Assembly (HLTS) Derek Bridges Final Design
Suspensions
27 Mar 2012
D0900630-v2 Intermediate Wire Jig Assembly, HLTS Derek Bridges et al. Final Design
Suspensions
27 Mar 2012
D0900689-v2 Base Plate, Library of Clamps, Lower Blade, HLTS Derek Bridges Preliminary Design
Suspensions
24 Mar 2012
D0900680-v2 Blade Clamp (3.5 Degree), Upper Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
22 Mar 2012
D0900679-v2 Blade Clamp (3.0 Degree), Upper Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
22 Mar 2012
D0900678-v2 Blade Clamp (2.5 Degree), Upper Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
22 Mar 2012
D0900677-v2 Blade Clamp (2.0 Degree), Upper Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
22 Mar 2012
D0900676-v2 Blade Clamp (1.5 Degree), Upper Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
22 Mar 2012
D0900675-v2 Blade Clamp (1.0 Degree), Upper Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
22 Mar 2012
D0900674-v2 Blade Clamp (0.5 Degree), Upper Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
22 Mar 2012
D0900673-v3 Blade Clamp (3.5 Degree), Upper Blade, Inside, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D0900672-v3 Blade Clamp (3.0 Degree), Upper Blade, Inside, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D0900671-v3 Blade Clamp (2.5 Degree), Upper Blade, Inside, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D0900670-v3 Blade Clamp (2.0 Degree), Upper Blade, Inside, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D0900669-v3 Blade Clamp (1.5 Degree), Upper Blade, Inside, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D0900668-v3 Blade Clamp (1.0 Degree), Upper Blade, Inside, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D0900667-v3 Blade Clamp (0.5 Degree), Upper Blade, Inside, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D0900665-v3 Library of Clamps, Upper Blade, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D080267-v2 Top Bridge, Upper Blade Bake Fixture, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D1003306-v1 Side Support, Upper Blade Bake Fixture, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D1003307-v1 Holddown Bar, Upper Blade Bake Fixture, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D1003305-v1 Stop Block, Upper Blade Bake Fixture, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D080268-v2 Base Plate, Upper Blade Bake Fixture, HLTS Derek Bridges Final Design
Suspensions
22 Mar 2012
D080265-v3 Upper Blade Bake Fixture, HLTS Derek Bridges et al. Final Design
Suspensions
22 Mar 2012
D1002133-v1 Mounting Bracket, Coil Holder, HLTS Derek Bridges Final Design
Suspensions
19 Mar 2012
D1002134-v1 Mounting Bracket Lateral Section, Coil Holder, HLTS Derek Bridges Final Design
Suspensions
19 Mar 2012
D1002135-v1 Mounting Bracket Longitudinal Section, Coil Holder, HLTS Derek Bridges Final Design
Suspensions
19 Mar 2012
D0901241-v2 Earthquake Stop Mount, Bridge, HLTS Derek Bridges Final Design
Suspensions
19 Mar 2012
D1102072-v1 Earthquake Stop Mount, Bridge, Upper, HLTS Derek Bridges Final Design
Suspensions
19 Mar 2012
D070310-v2 Top Blade Guard Bar, HLTS Derek Bridges Final Design
Suspensions
19 Mar 2012
D070309-v2 Top Blade Guard Riser, HLTS Derek Bridges Final Design
Suspensions
19 Mar 2012
D0901286-v2 Secondary Metal Prism Breakoff, HLTS Michael Meyer et al. Final Design
Suspensions
18 Mar 2012
D070338-v4 Metal Bottom Mass, HLTS Derek Bridges Preliminary Design
Suspensions
17 Mar 2012
D080238-v2 Collar, Lower, 900g, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D080236-v2 Collar, Lower, 700g, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D080234-v2 Collar, Lower, 500g, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D080232-v2 Collar, Lower, 300g, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D080183-v2 Collar, Lower, 100g, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D080229-v2 Collar, Upper, 900g, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D080227-v2 Collar, Upper, 700g, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D080225-v2 Collar, Upper, 500g, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D080223-v2 Collar, Upper, 300g, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D080182-v2 Collar, Upper, 100g, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D030155-v2 Center Offset, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D070336-v3 Main Section, Intermediate Mass, HLTS Derek Bridges Preliminary Design
Suspensions
17 Mar 2012
D070585-v4 Upper Clamp, Intermediate Wire, Inside, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D070394-v3 Upper Clamp, Intermediate Wire, Outside, HLTS Michael Meyer Final Design
Suspensions
17 Mar 2012
D030149-v2 Intermediate Wire Breakoff, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D070405-v3 Lower Clamp, Intermediate Wire, Inside, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D070406-v3 Lower Clamp, Intermediate Wire, Outside, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D080263-v2 Additional Mass Disk, 150g Derek Bridges Preliminary Design
Suspensions
17 Mar 2012
D070333-v2 Additional Mass Disk, 100g Derek Bridges Preliminary Design
Suspensions
17 Mar 2012
D0901405-v2 Additional Mass Disk, 50g Derek Bridges Preliminary Design
Suspensions
17 Mar 2012
D1001229-v1 Additional Mass Disk, 20g Derek Bridges Final Design
Suspensions
17 Mar 2012
D1001230-v1 Additional Mass Disk, 10g Derek Bridges Final Design
Suspensions
17 Mar 2012
D1001697-v1 Magnet Retainer, BOSEM Derek Bridges Final Design
Suspensions
17 Mar 2012
D030139-v2 Roll Offset, T-Piece, Upper Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D1001669-v1 Pitch Insert, T-Piece, Upper Mass, HLTS Derek Bridges Final Design
Suspensions
17 Mar 2012
D020615-v4 Lower Blade, HLTS Michael Meyer et al. Final Design
Suspensions
16 Mar 2012
D020652-v2 C-Clamp, Upper Mass, HLTS Derek Bridges Final Design
Suspensions
16 Mar 2012
D070341-v3 Upper Clamp, Upper Wire, Outside, HLTS Derek Bridges Final Design
Suspensions
16 Mar 2012
D020601-v2 Blade Clamp (0.0 Degree), Upper Blade, Outside, HLTS Michael Meyer et al. Preliminary Design
Suspensions
16 Mar 2012
D020617-v2 Upper Blade, HLTS Calum Torrie et al. Final Design
Suspensions
16 Mar 2012
D020622-v3 Blade Clamp (0.0 Degree), Upper Blade, Inside, HLTS Michael Meyer et al. Final Design
Suspensions
16 Mar 2012
D1001914-v2 Shim, 2.0mm, Upper Blade, HLTS Derek Bridges Final Design
Suspensions
16 Mar 2012
D1003104-v1 Shim, 1.5mm, Upper Blade, HLTS Derek Bridges Final Design
Suspensions
16 Mar 2012
D070331-v3 Shim, 1.0mm, Upper Blade, HLTS Derek Bridges Final Design
Suspensions
16 Mar 2012
D1002973-v2 Shim, 0.5mm, Upper Blade, HLTS Derek Bridges Final Design
Suspensions
16 Mar 2012
D1003105-v1 Shim, 0.0mm, Upper Blade, HLTS Derek Bridges Final Design
Suspensions
16 Mar 2012
D070460-v2 Earthquake Stop Mount, Long, HLTS Derek Bridges Final Design
Suspensions
14 Mar 2012
D070322-v2 Earthquake Stop Bracket, Long, HLTS Derek Bridges Final Design
Suspensions
14 Mar 2012
D070319-v2 Earthquake Stop Assembly, Bridge, HLTS Derek Bridges Final Design
Suspensions
14 Mar 2012
D0901553-v4 Lower AOSEM Alignment Assembly, Bottom Mass, HLTS Bobby Moore et al. Final Design
Suspensions
14 Mar 2012
D0901552-v4 Upper AOSEM Alignment Assembly, Bottom Mass, HLTS Bobby Moore et al. Final Design
Suspensions
14 Mar 2012
D080677-v4 Coil Holder Assembly, HLTS Derek Bridges Preliminary Design
Suspensions
13 Mar 2012
D1102071-v2 Earthquake Stop Assembly, Bridge, Upper, HLTS Derek Bridges Final Design
Suspensions
12 Mar 2012
D070436-v4 Lower Loop Wire Assembly, HLTS Derek Bridges Final Design
Suspensions
12 Mar 2012
D070393-v3 Intermediate Wire Assembly, HLTS Derek Bridges Final Design
Suspensions
12 Mar 2012
D070335-v6 Upper Mass Assembly, HLTS Derek Bridges Preliminary Design
Suspensions
12 Mar 2012
D070334-v4 Intermediate Mass Assembly, HLTS Derek Bridges Final Design
Suspensions
12 Mar 2012
D070340-v3 Upper Wire Assembly, HLTS Derek Bridges Final Design
Suspensions
12 Mar 2012
D070328-v2 Rotating Plate, Rotational Adjuster, HLTS Derek Bridges Final Design
Suspensions
12 Mar 2012
D070326-v4 Rotational Adjuster, HLTS Derek Bridges Final Design
Suspensions
12 Mar 2012
D070374-v2 Mounting Pad Body, HLTS Derek Bridges Final Design
Suspensions
12 Mar 2012
D1102344-v1 HLTS Lifting Plate Assembly, Intermediate Mass Derek Bridges Final Design
Suspensions
02 Mar 2012
E1200212-x0 DCN - HLTS Production Updates Derek Bridges Final Design
Change Control
Suspensions
01 Mar 2012
E1200252-x0 DCN - HLTS and Fixture Production Updates Derek Bridges Final Design
Change Control
Suspensions
01 Mar 2012
D080727-v3 Earthquake Stop Assembly, Long Bracket, HLTS Derek Bridges Final Design
Suspensions
29 Feb 2012
D080726-v3 Earthquake Stop Assembly, Long Mount, HLTS Derek Bridges Preliminary Design
Suspensions
29 Feb 2012
D070308-v3 Top Blade Guard Assembly, HLTS Derek Bridges Final Design
Suspensions
28 Feb 2012
D070327-v2 Base Plate, Rotational Adjuster, HLTS Derek Bridges Preliminary Design
Suspensions
23 Feb 2012
D070354-v2 Earthquake Stop Bracket, Short, HLTS Derek Bridges Preliminary Design
Suspensions
22 Feb 2012
D1200318-v1 Earthquake Stop Adapter, Bottom Mass, Upper, HLTS Derek Bridges Final Design
Suspensions
22 Feb 2012
D070332-v6 HLTS Suspension Assembly Derek Bridges Preliminary Design
Suspensions
21 Feb 2012
D1001754-v4 HLTS Upper Mass/Coil Holder Assembly Derek Bridges Final Design
Suspensions
21 Feb 2012
D1101790-v1 Secondary Prism Placement Fixture, Glass Optic, HLTS Derek Bridges Final Design
Core Optics
Suspensions
18 Feb 2012
D1100757-v3 Magnet Gluing Fixture Baseplate Bobby Moore et al. Preliminary Design
Suspensions
15 Feb 2012
D1102124-v2 Main Body, Blade Pulldown Support, HAM Triple Derek Bridges Final Design
Suspensions
14 Feb 2012
D1102125-v1 Clamp, Blade Pulldown Support, HAM Triple Derek Bridges Final Design
Suspensions
14 Feb 2012
D070437-x0 HLTS Lower Wire Shim Derek Bridges Preliminary Design
Suspensions
10 Feb 2012
D0901813-v1 HLTS Upper Clamp, Intermediate Wire, Outside, Blade Characterization Derek Bridges Final Design
Suspensions
10 Feb 2012
D0901814-v1 HLTS Upper Clamp, Upper Wire, Inside, Blade Characterization Derek Bridges Final Design
Suspensions
10 Feb 2012
D0901335-v1 HLTS Upper Clamp Assembly, Intermediate Wire Derek Bridges Preliminary Design
Suspensions
10 Feb 2012
E1200182-x0 DCN - HXTS Magnet Fixture Modifications Derek Bridges Final Design
Change Control
Suspensions
09 Feb 2012
D1000210-v1 Magnet/Dumbbell Sanding Plate Derek Bridges Final Design
Suspensions
09 Feb 2012
D1200235-v1 Magnet Placement Rod, HLTS/HSTS Derek Bridges Final Design
Suspensions
09 Feb 2012
D0901461-v2 HLTS Magnet Placement Fixture, Intermediate Mass Derek Bridges Final Design
Suspensions
09 Feb 2012
D1200234-v1 Aluminum Bushing, Magnet Fixture, HLTS/HSTS Derek Bridges Final Design
Change Control
Suspensions
07 Feb 2012
D0901079-v2 HLTS Upper Wire Lower Clamp Assembly Derek Bridges Preliminary Design
Suspensions
23 Dec 2011
D0901078-v1 HLTS Upper Wire Upper Clamp Assembly Derek Bridges Preliminary Design
Suspensions
23 Dec 2011
E1100865-x0 DCN - HLTS Glass Optic Secondary Prism Placement Fixture and Lower Loop Wire Comb Derek Bridges Final Design
Change Control
Suspensions
20 Dec 2011
E1101195-x0 DCN - HLTS Odds and Ends Derek Bridges Final Design
Change Control
Suspensions
19 Dec 2011
D0902459-v3 Sapphire Prism Placement Fixture, HLTS Derek Bridges Preliminary Design
Suspensions
19 Dec 2011
D0902661-v3 Sapphire Prism Bonding Jig, HLTS Derek Bridges Final Design
Suspensions
19 Dec 2011
D0902662-v3 Sapphire Prism Bonding Fixture, HLTS Derek Bridges Final Design
Suspensions
19 Dec 2011
E1000881-x0 DCN - HAM Suspension Testing Cover Derek Bridges Final Design
Suspensions
Subsystem Test
19 Dec 2011
D1001133-v2 HAM Suspension Testing Cover Derek Bridges Final Design
Suspensions
Subsystem Test
19 Dec 2011
D0902665-v3 Bonding Template Front, Sapphire Prism, HLTS Derek Bridges Final Design
Suspensions
15 Dec 2011
D1102345-v1 Lifting Plate Handle, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
15 Dec 2011
D1102343-v1 Lifting Plate, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
15 Dec 2011
D0901460-v3 HLTS Magnet Placement Fixture, Bottom Mass Derek Bridges Final Design
Suspensions
12 Dec 2011
E1101054-x0 DCN - HLTS/HSTS Miscellaneous Tools Derek Bridges Final Design
Change Control
Suspensions
07 Dec 2011
D1102180-v1 Base Plate, Wire Jig Clamp, HAM Triple Derek Bridges Final Design
Suspensions
07 Dec 2011
D1102120-v1 Wire Jig Clamp, HAM Triple Derek Bridges Final Design
Suspensions
07 Dec 2011
E1101173-x0 DCN - HAM Triple Blade Measurement Device Derek Bridges Final Design
Change Control
Suspensions
07 Dec 2011
D1102117-v1 Wire Jig Clamp Assembly, HAM Triple Derek Bridges Final Design
Suspensions
07 Dec 2011
E1101150-v1 Drawing Package For HAM Triple Plastic Fixture Parts Derek Bridges Procurements
Fabrication
Suspensions
06 Dec 2011
D0902719-v1 HSTS Support Cylinder, Sapphire Prism Bonding Fixture Derek Bridges Preliminary Design
Suspensions
06 Dec 2011
D0902703-x0 HSTS Sapphire Prism Placement Fixture Derek Bridges Preliminary Design
Suspensions
22 Nov 2011
D1102101-v1 HSTS Secondary Prism Placement Fixture Arrangement, Metal Bottom Mass Derek Bridges Final Design
Suspensions
22 Nov 2011
D1102103-v1 HSTS Secondary Prism Placement Fixture, Glass Optic Derek Bridges Final Design
Suspensions
22 Nov 2011
D1102100-v1 HSTS Secondary Prism Placement Fixture, Metal Bottom Mass Derek Bridges Final Design
Suspensions
22 Nov 2011
D1102104-v1 HSTS Secondary Prism Placement Fixture Arrangement, Glass Optic Derek Bridges Final Design
Suspensions
22 Nov 2011
E1101061-x0 DCN - HSTS Secondary Prism Placement Fixtures and Lower Loop Wire Comb Derek Bridges Final Design
Change Control
Suspensions
07 Nov 2011
D1102161-v1 Cap Body, Semi-Rounded End, Earthquake Stop Derek Bridges Final Design
Suspensions
07 Nov 2011
D1102118-x0 Lower Blade Tip Measurement Device, HAM Triple Derek Bridges Final Design
Suspensions
01 Nov 2011
D1102119-v1 Blade Pulldown Support, HAM Triple Derek Bridges Final Design
Suspensions
01 Nov 2011
D1102123-x0 Ruler Holder, Blade Tip Measurement Device, HAM Triple Derek Bridges Final Design
Suspensions
01 Nov 2011
D1102122-x0 Clamp, Blade Tip Measurement Device, HAM Triple Derek Bridges Final Design
Suspensions
01 Nov 2011
D1102121-x0 Main Body, Blade Tip Measurement Device, HAM Triple Derek Bridges Final Design
Suspensions
01 Nov 2011
E1101053-x0 DCN - HLTS Production Revisions of Assembly Drawings Derek Bridges Final Design
Change Control
Suspensions
27 Oct 2011
E1101010-x0 DCN - Revised HLTS Bottom Mass Magnet Placement Fixture Derek Bridges Final Design
Change Control
Suspensions
18 Oct 2011
D1101921-v1 Locating Wedge, Optic Base Assembly Derek Bridges Final Design
Suspensions
18 Oct 2011
D1101779-v1 Dowel Pin Insertion Fixture, Sapphire Prism Holder Derek Bridges Final Design
Suspensions
12 Oct 2011
D0902087-v3 Positioning Standoff, Magnet Placement Fixture, Bottom Mass, HLTS Derek Bridges Final Design
Suspensions
11 Oct 2011
D1101920-v1 PFA Tip, Locating Stop Derek Bridges Final Design
Suspensions
11 Oct 2011
D060544-v2 Earthquake Stop for Glass Joe ODell et al. Final Design
Suspensions
08 Oct 2011
D070357-v1 Earthquake Stop Mount, Short, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D080729-v1 Earthquake Stop Assembly, Short Mount, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900681-v2 Library of Clamps, Lower Blade, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0902452-v2 Standoff Side Plate, Short, Magnet Placement Fixture, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
08 Oct 2011
D0902445-v2 Standoff Plate, Magnet Placement Fixture, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
08 Oct 2011
D0901551-v4 Lower AOSEM Alignment Assembly, Intermediate Mass, HLTS Bobby Moore et al. Final Design
Suspensions
08 Oct 2011
D0902024-v4 Upper AOSEM Alignment Assembly, Intermediate Mass, HLTS Bobby Moore et al. Preliminary Design
Suspensions
08 Oct 2011
D0901436-v2 Wire Clamp Mount, Lower Loop Wire Jig, HLTS Derek Bridges Final Design
Suspensions
08 Oct 2011
D0901435-v3 Wire Start Clamp, Inside, Lower Loop Wire Jig, HLTS Derek Bridges Final Design
Suspensions
08 Oct 2011
D0901135-v2 Mounting Block, Lower Clamp, Upper Wire, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D020555-x0 Upper Clamp, Lower Wire, Inside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0901396-v1 Mounting Block, Lower Loop Wire Clamp, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D070449-v2 Coil Holder (Tablecloth), HLTS Derek Bridges Final Design
Suspensions
08 Oct 2011
D0901395-v1 Clamp Assembly, Lower Loop Wire, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0901336-v1 Lower Clamp Assembly, Intermediate Wire, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0901168-v1 Mounting Block, Lower Clamp, Intermediate Wire, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900688-v2 Blade Clamp (3.5 Degree), Lower Blade, Inside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900687-v2 Blade Clamp (3.0 Degree), Lower Blade, Inside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900686-v2 Blade Clamp (2.5 Degree), Lower Blade, Inside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900685-v2 Blade Clamp (2.0 Degree), Lower Blade, Inside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900684-v2 Blade Clamp (1.5 Degree), Lower Blade, Inside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900683-v2 Blade Clamp (1.0 Degree), Lower Blade, Inside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900682-v2 Blade Clamp (0.5 Degree), Lower Blade, Inside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900696-v2 Blade Clamp (3.5 Degree), Lower Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900695-v2 Blade Clamp (3.0 Degree), Lower Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900694-v2 Blade Clamp (2.5 Degree), Lower Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900693-v2 Blade Clamp (2.0 Degree), Lower Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900692-v2 Blade Clamp (1.5 Degree), Lower Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900691-v2 Blade Clamp (1.0 Degree), Lower Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D0900690-v2 Blade Clamp (0.5 Degree), Lower Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D070320-v2 Mounting Bracket, Coil Holder, HLTS Derek Bridges Preliminary Design
Suspensions
08 Oct 2011
D1001699-v1 Magnet Holder, BOSEM, HLTS Derek Bridges Final Design
Suspensions
08 Oct 2011
D1101811-v1 Secondary Prism Placement Fixture Arrangement, Glass Optic, HLTS Derek Bridges Final Design
Suspensions
06 Oct 2011
E1100838-x0 DCN - HLTS Metal Mass Secondary Prism Fixture Derek Bridges Final Design
Change Control
Suspensions
05 Oct 2011
D0900999-v3 Screw, Socket Head Cap, 1/4-20 UNC-3A X 2 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
19 Sep 2011
D1101792-v1 Secondary Prism Placement Fixture Arrangement, Metal Bottom Mass, HLTS Derek Bridges Final Design
Suspensions
18 Sep 2011
E1100866-v1 Drawing Package for HLTS Prism Fixture Metal Parts Derek Bridges Procurements
Fabrication
Suspensions
15 Sep 2011
D0902461-v2 Optic Rest Wedge, Optic Holder, HAM Triple Suspension Derek Bridges Final Design
Suspensions
15 Sep 2011
D0902460-v2 Base Plate, Optic Holder, HAM Triple Suspension Derek Bridges Final Design
Suspensions
15 Sep 2011
D1101789-v1 Secondary Prism Placement Fixture, Metal Bottom Mass, HLTS Derek Bridges Final Design
Suspensions
15 Sep 2011
E1100826-x0 DCN - HLTS Sapphire Prism Placement Fixture Revisions Derek Bridges Final Design
Change Control
Suspensions
09 Sep 2011
D1101780-v1 Dowel Pin Insertion Fixture Assembly, Sapphire Prism Holder Derek Bridges Final Design
Suspensions
09 Sep 2011
D0902721-v2 Sapphire Prism Holder Guide, HAM Triple Suspension Derek Bridges Fabrication
Suspensions
09 Sep 2011
D0902658-v2 Optic Holder, HAM Triple Suspension Derek Bridges Preliminary Design
Suspensions
09 Sep 2011
D1101648-v1 Cap Body, Rounded End, Earthquake Stop Derek Bridges Final Design
Suspensions
06 Sep 2011
D0902669-v2 Support Cylinder, Sapphire Prism Bonding Fixture, HLTS Derek Bridges Final Design
Suspensions
06 Sep 2011
D1100197-v1 Spacer, Bottom Mass Optic, HLTS/HSTS Derek Bridges Final Design
Suspensions
05 Sep 2011
D080124-v3 Prism Breakoff, Lower Wire, Bottom Mass, HLTS Derek Bridges Final Design
Suspensions
05 Sep 2011
D070438-v4 Clamp, Lower Loop Wire, HLTS Derek Bridges Final Design
Suspensions
05 Sep 2011
D030148-v2 Lower Wire Breakoff, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
05 Sep 2011
D030156-v2 Side Offset, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
05 Sep 2011
D080181-v2 Intermediate Mass Changer Assembly, HLTS Derek Bridges Final Design
Suspensions
05 Sep 2011
D020623-v2 Blade Clamp (0.0 Degree), Lower Blade, Outside, HLTS Derek Bridges Preliminary Design
Suspensions
05 Sep 2011
D020602-v2 Blade Clamp (0.0 Degree), Lower Blade, Inside, HLTS Michael Meyer Preliminary Design
Suspensions
05 Sep 2011
D020624-v3 Lower Clamp, Upper Wire, Outside, HLTS Derek Bridges Final Design
Suspensions
05 Sep 2011
D020610-v3 Lower Clamp, Upper Wire, Inside, HLTS Derek Bridges Final Design
Suspensions
05 Sep 2011
D020611-v4 Upper Clamp, Upper Wire, Inside, HLTS Derek Bridges Final Design
Suspensions
05 Sep 2011
D070329-v2 Pull Plate, Rotational Adjuster, HLTS Derek Bridges Final Design
Suspensions
05 Sep 2011
D070330-v2 Push Plate, Rotational Adjuster, HLTS Derek Bridges Final Design
Suspensions
05 Sep 2011
D0900628-v2 Side Bracket, Mounting Pad, HLTS Derek Bridges Final Design
Suspensions
26 Aug 2011
D0900626-v2 Mounting Pad Assembly, HLTS Derek Bridges Final Design
Suspensions
26 Aug 2011
D070537-v2 Structure, HLTS Derek Bridges Final Design
Suspensions
26 Aug 2011
D080718-v1 HLTS Overall Assembly and Assembly Fixtures Derek Bridges Preliminary Design
Suspensions
26 Aug 2011
D0900627-v2 Front Bracket, Mounting Pad, HLTS Derek Bridges Final Design
Suspensions
19 Aug 2011
E0900336-v1 HLTS Traveler for Prototype Blades and Upper Blade Bake Fixture Derek Bridges Preliminary Design
Suspensions
28 Jul 2011
G1100147-v1 HLTS Kickoff Presentation Derek Bridges et al. Assembly
Meeting
Suspensions
Subsystem Test
Incoming Inspection
06 Jul 2011
E1100228-x0 DCN - Production version of HLTS including AOSEM brackets Derek Bridges Final Design
Change Control
Suspensions
27 Jun 2011
C1104717-v1 SOW - Fabrication of Shared Magnet Fixture Parts Derek Bridges Procurements
Fabrication
Suspensions
24 Jun 2011
E1100535-v1 Drawing Package for HLTS Magnet Fixture Parts Derek Bridges Procurements
Fabrication
Suspensions
24 Jun 2011
D1101137-x0 SHCS, #8-32 X 1.5 Long, Fully Threaded Derek Bridges Assembly
System Engineering
15 Jun 2011
D1101136-x0 SHCS, 1/4-20 X 3 Long, Fully Threaded Derek Bridges Assembly
System Engineering
15 Jun 2011
D1101135-x0 SHCS, 1/4-20 X 2 Long, Fully Threaded Derek Bridges Assembly
System Engineering
15 Jun 2011
D1101134-x0 SHCS, 1/4-20 X 1.5 Long, Fully Threaded Derek Bridges Assembly
System Engineering
15 Jun 2011
E1100534-v1 Drawing Package for Shared Magnet Fixture Parts Derek Bridges Procurements
Fabrication
Suspensions
14 Jun 2011
E1000849-x0 DCN - Production HLTS Assembly Drawings Derek Bridges Final Design
Change Control
Suspensions
13 Jun 2011
E1100527-x0 DCN - HLTS Structure As-Built Modifications Derek Bridges Final Design
Change Control
Suspensions
13 Jun 2011
D070575-v3 Base Plate, Structural Weldment, HLTS Derek Bridges Final Design
Suspensions
11 Jun 2011
E1100132-x0 DCN - HLTS Magnet Placement Fixtures Derek Bridges Final Design
Change Control
Suspensions
21 Apr 2011
F1000025-v1 Quad Suspension Metal Build Test Report Template Mark Barton et al. Assembly
Reports
Suspensions
Subsystem Test
19 Apr 2011
D0902062-v2 Vertical Locating Block, Magnet Placement Fixture, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
18 Apr 2011
D0902060-v2 Base Plate, Magnet Placement Fixture, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
18 Apr 2011
D0902068-v2 Standoff Ring, Magnet Placement Fixture, Bottom Mass, HLTS Derek Bridges Final Design
Suspensions
16 Apr 2011
E1100285-x0 HLTS Metal Build Test Reports Derek Bridges Reports
Suspensions
Subsystem Test
30 Mar 2011
D030022-v1 Screw, Socket Head Cap, 1/4-20 UNC-2A X 2.25 Long, Fully Threaded, Rounded End Derek Bridges et al. Fabrication
Document Migration
System Engineering
21 Mar 2011
D0901492-v3 AOSEM Alignment Bracket, Intermediate Mass, HLTS Derek Bridges Final Design
Suspensions
10 Mar 2011
D0901549-v3 AOSEM Alignment Bracket, Bottom Mass, HLTS Derek Bridges Final Design
Suspensions
10 Mar 2011
E1000498-x0 aLIGO SUS BOSEM Testing Documentation Derek Bridges et al. Suspensions
Subsystem Test
Incoming Inspection
04 Mar 2011
E1000500-x0 aLIGO SUS Test Stand and Electronics Testing and Commissioning Documentation Derek Bridges et al. Commissioning
Suspensions
Subsystem Test
28 Feb 2011
D1100356-v2 Optic Base Assembly, Magnet Placement Fixture, HAM Triple Suspension Derek Bridges Final Design
Suspensions
25 Feb 2011
D0902064-v2 Base Plate, Optic Base Assembly, Magnet Placement Fixture Derek Bridges Final Design
Suspensions
25 Feb 2011
D0902066-v2 Optic Rest Block, Optic Base Assembly, Magnet Placement Fixture Derek Bridges Final Design
Suspensions
25 Feb 2011
D1100360-v1 Optic Base Riser, Magnet Placement Fixture, HAM Triple Suspension Derek Bridges Final Design
Suspensions
25 Feb 2011
D1000244-v1 Magnetic Plug Installation Fixture Derek Bridges Final Design
Suspensions
23 Feb 2011
D1002500-v1 Magnetic Plug Installation Fixture Arrangement Derek Bridges Final Design
Suspensions
23 Feb 2011
D020380-v2 Wire Start Clamp, Outside Derek Bridges Preliminary Design
Suspensions
23 Feb 2011
D1100246-v1 Prism Gluing Test Mass, HLTS Derek Bridges Assembly
Suspensions
16 Feb 2011
E1000363-v3 Table 2 - HLTS Machined Parts Quantities Derek Bridges Fabrication
Suspensions
11 Feb 2011
E1100057-x0 DCN - HLTS Wire Jigs - Production Version Derek Bridges Final Design
Change Control
Suspensions
09 Feb 2011
D0900603-v2 Wire Start Clamp, Inside, Upper Wire Jig, HLTS Derek Bridges Final Design
Suspensions
07 Feb 2011
D0900634-v2 Wire Start Clamp, Inside, Intermediate Wire Jig, HLTS Derek Bridges et al. Final Design
Suspensions
07 Feb 2011
D0900632-v2 Wire Clamp Mount, Intermediate Wire Jig, HLTS Derek Bridges et al. Final Design
Suspensions
07 Feb 2011
D980184-v2 LOS Clamp, Long Derek Bridges Final Design
System Engineering
07 Feb 2011
D0901433-v2 Base Plate, Lower Loop Wire Jig, HLTS Derek Bridges Final Design
Suspensions
01 Feb 2011
D0900633-v2 Base Plate, Intermediate Wire Jig, HLTS Derek Bridges et al. Final Design
Suspensions
31 Jan 2011
D0900595-v2 Base Plate, Upper Wire Jig, HLTS Derek Bridges Final Design
Suspensions
30 Jan 2011
D020660-v1 Blade Pulldown Device, HAM Suspensions Derek Bridges Final Design
Suspensions
26 Jan 2011
D0900597-v2 Wire Clamp Mount, Upper Wire Jig, HLTS Derek Bridges et al. Final Design
Suspensions
21 Jan 2011
D0900596-v2 Blade Clamp Mount, Upper Wire Jig, HLTS Derek Bridges et al. Final Design
Suspensions
21 Jan 2011
T080184-v2 A Color Coding System for Mechanical Models Derek Bridges Modelling
Final Design
Conceptual Design
Preliminary Design
System Engineering
18 Jan 2011
E1000693-x0 DCN - Production HLTS Fixtures Derek Bridges Final Design
Change Control
Suspensions
07 Jan 2011
D1003362-v1 Base Plate, Blade Pulldown Device Derek Bridges Final Design
Suspensions
07 Jan 2011
E1100001-x0 DCN - Updated HLTS Wire Clamps Derek Bridges Final Design
Change Control
Suspensions
05 Jan 2011
D010266-v1 Wire Clamp Cylinder, Blade Pulldown Device Derek Bridges Final Design
Suspensions
21 Dec 2010
D010268-v1 Lower Wire Clamp, Blade Pulldown Device Derek Bridges Final Design
Suspensions
08 Dec 2010
D010261-v1 Lower Wire Clamp Plate, Blade Pulldown Device Derek Bridges Final Design
Suspensions
06 Dec 2010
D0901855-v1 Upper Clamp, Intermediate Wire, Outside, OMC/HSTS (Blade Characterization Stand) Derek Bridges Final Design
Suspensions
03 Dec 2010
D0901815-v1 Upper Clamp, Intermediate Wire, Inside, HLTS (Blade Characterization Stand) Derek Bridges Final Design
Suspensions
03 Dec 2010
C1001578-v4 SOW - Fabrication of HLTS Machined Parts Derek Bridges et al. Fabrication
Suspensions
23 Nov 2010
E1000741-x0 DCN - Revised HLTS Upper Blade Clamps and Shims Derek Bridges Final Design
Change Control
Suspensions
22 Nov 2010
E1000364-v2 Drawing Package for HLTS Machined Parts SOW Derek Bridges Final Design
Fabrication
Suspensions
22 Nov 2010
D1002865-v1 Adjustment Nut, Thick, AOSEM Alignment Assembly Bobby Moore et al. Final Design
Suspensions
16 Nov 2010
E1000301-x0 DCN - HLTS Production Revision Non-Suspended Parts Derek Bridges Final Design
Change Control
Suspensions
08 Nov 2010
E1000236-x0 DCN - HLTS Parts with Only Notes Changes Derek Bridges Final Design
Change Control
Suspensions
08 Nov 2010
D0901550-v2 Upper AOSEM Mounting Bracket, Bottom Mass, HLTS Bobby Moore et al. Final Design
Suspensions
08 Nov 2010
D0900340-v2 Lower AOSEM Mounting Bracket, Bottom Mass, HLTS Derek Bridges Final Design
Suspensions
05 Nov 2010
D0901006-v1 Screw, Socket Head Cap, #4-40 UNC-2A X 0.5 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
04 Nov 2010
D1002858-v1 AOSEM Adjustment Collar (Reverse Side) Derek Bridges Final Design
Suspensions
29 Oct 2010
C1001577-v5 SOW - Fabrication of HLTS Structures Derek Bridges et al. Procurements
Fabrication
Suspensions
19 Oct 2010
E1000411-v2 HLTS Structure Drawing Package Derek Bridges Procurements
Suspensions
11 Oct 2010
E1000570-x0 DCN - Update to production version of HLTS Structural Weldment Derek Bridges Final Design
Change Control
Suspensions
11 Oct 2010
E1000166-x0 DCN - HLTS Suspended Mass Updated Drawings Derek Bridges Final Design
Change Control
Suspensions
05 Oct 2010
E1000516-x0 aLIGO SUS Quad Suspension Assembly Process Travelers Derek Bridges et al. Assembly
Suspensions
05 Oct 2010
D060548-v2 Fused Silica Earthquake Stop Joe ODell et al. Final Design
Suspensions
05 Oct 2010
E1000510-x0 aLIGO SUS BSC Suspension Test Stand and Electronics Testing and Commissioning Documentation Derek Bridges et al. Assembly
Final Design
Commissioning
Suspensions
Subsystem Test
04 Oct 2010
E1000511-x0 aLIGO SUS HAM Suspension Test Stand and Electronics Testing and Commissioning Documentation Derek Bridges et al. Assembly
Commissioning
Suspensions
Subsystem Test
04 Oct 2010
D080725-v2 Earthquake Stop for Metal or Glass, 2.5 Inch Derek Bridges Final Design
Suspensions
26 Sep 2010
D080724-v3 Mounting Cap, Earthquake Stop Derek Bridges Final Design
Suspensions
26 Sep 2010
E1000412-x0 Drawing Table for HLTS Structures Derek Bridges Procurements
Suspensions
15 Sep 2010
E1000371-x0 DCN - HLTS Structure, Production Version Derek Bridges Final Design
Change Control
Suspensions
08 Sep 2010
D070579-v2 Upper Front Gusset, Structural Weldment, HLTS Derek Bridges Final Design
Suspensions
08 Sep 2010
D070576-v2 Lower Front Gusset, Structural Weldment, HLTS Derek Bridges Final Design
Suspensions
31 Aug 2010
D070577-v2 Side Gusset, Structural Weldment, HLTS Derek Bridges Final Design
Suspensions
31 Aug 2010
D070578-v2 Side Strut, Structural Weldment, HLTS Derek Bridges Final Design
Suspensions
31 Aug 2010
D070580-v2 Top Gusset, Structural Weldment, HLTS Derek Bridges Final Design
Suspensions
31 Aug 2010
T1000452-v2 Update on the Production Redesign of the HAM Large Triple Suspension Structure Derek Bridges et al. Modelling
Final Design
Reports
Suspensions
27 Aug 2010
D030021-v2 Screw, Socket Head Cap, 1/4-20 UNC-3A X 2.5 Long, Fully Threaded, Rounded End Derek Bridges Final Design
Fabrication
System Engineering
26 Aug 2010
D030023-v3 Screw, Socket Head Cap, 1/4-20 UNC-3A X 1 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
16 Aug 2010
T1000356-v4 Action Item Report for HLTS Mechanical Components Derek Bridges Final Design
Reports
Suspensions
11 Aug 2010
D020653-v2 Screwdrive System, Upper Mass, HLTS Derek Bridges Final Design
Suspensions
03 Aug 2010
D020607-v3 T-Piece, Upper Mass, HLTS Derek Bridges Final Design
Suspensions
03 Aug 2010
D020605-v3 Main Section, Upper Mass, HLTS Derek Bridges Final Design
Suspensions
03 Aug 2010
D0900990-v2 Screw, Socket Head Cap, #8-32 UNC-3A X 1.5 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
20 Jul 2010
D080221-v2 Guard, Lower Blade, HLTS Derek Bridges Preliminary Design
Suspensions
07 Jul 2010
D0900666-v2 Base Plate, Library of Clamps, Upper Blade, HLTS Derek Bridges Preliminary Design
Suspensions
06 Jul 2010
E1000153-x0 DCN - HAM Suspension Testing Cover Derek Bridges Final Design
Suspensions
Subsystem Test
13 May 2010
D1000960-v1 HAM Suspension Testing Cover Assembly Derek Bridges Final Design
Suspensions
Subsystem Test
13 May 2010
D1001085-v1 HAM Suspension Testing Cover Door Weldment Derek Bridges Final Design
Suspensions
Subsystem Test
13 May 2010
D1000961-v1 HAM Suspension Testing Cover Weldment Derek Bridges Final Design
Suspensions
Subsystem Test
13 May 2010
E1000053-v6 HLTS Final Design Review Summary Checklist Norna Robertson et al. Final Design
Suspensions
23 Apr 2010
G1000122-v1 Update on the HAM Large Triple Suspension (HLTS) Derek Bridges Reports
Suspensions
15 Mar 2010
E0900446-x0 DCN - HLTS Prototype Assembly Drawings and As-Built Revisions Derek Bridges Preliminary Design
Change Control
Suspensions
01 Mar 2010
E0900225-x0 DCN - 40-Meter Cable Clamp Derek Bridges Preliminary Design
Change Control
Suspensions
21 Jan 2010
T080108-v1 Notes on Lower Quad Installation at LASTI Gerardo Moreno et al. Suspensions
Subsystem Test
Installation
20 Jan 2010
D080723-v2 Cap Body, Resin, Earthquake Stop Derek Bridges Preliminary Design
Suspensions
15 Dec 2009
E0900477-x0 Traveler for HLTS Prototype Parts - Batch 8 Derek Bridges Preliminary Design
Suspensions
08 Dec 2009
D070581-v1 Leg, HLTS Structural Weldment Derek Bridges Preliminary Design
Suspensions
03 Dec 2009
D070583-v1 Front Cross Beam, Thin, HLTS Structural Weldment Derek Bridges Preliminary Design
Suspensions
03 Dec 2009
D070584-v1 Side Cross Beam, Thin, HLTS Structural Weldment Derek Bridges Preliminary Design
Suspensions
03 Dec 2009
D080283-v1 Front Cross Beam, Thick, HLTS Structural Weldment Derek Bridges Preliminary Design
Suspensions
03 Dec 2009
D080282-v1 Side Cross Beam, Thick, HLTS Structural Weldment Derek Bridges Preliminary Design
Suspensions
03 Dec 2009
D070582-v1 Top Gusset, Short, HLTS Structural Weldment Derek Bridges Preliminary Design
Suspensions
03 Dec 2009
D0902069-v1 Standoff Block, Magnet Placement Fixture, HLTS Derek Bridges Preliminary Design
Suspensions
03 Dec 2009
E0900442-x0 Traveler HLTS Prototype Additional Helicoils (Batch 8) Derek Bridges Fabrication
Suspensions
01 Dec 2009
E0900369-x0 DCN - HLTS Sapphire Prism Placement Fixture Derek Bridges Preliminary Design
Change Control
Suspensions
23 Nov 2009
D080468-v1 Screw, Socket Head Cap, #2-56 UNC-2A X 0.375 Long, Fully Threaded, Rounded End Derek Bridges Preliminary Design
System Engineering
18 Nov 2009
D0902585-v1 Optic Rest Plate, Optic Holder Derek Bridges Preliminary Design
Suspensions
11 Nov 2009
E0900337-v1 Traveler for HLTS Prototype Parts - Batch 2 Derek Bridges Preliminary Design
Suspensions
06 Nov 2009
E0900338-v1 Traveler for HLTS Prototype Parts - Batch 3 Derek Bridges Preliminary Design
Suspensions
06 Nov 2009
E0900339-v1 Traveler for HLTS Prototype Parts - Batch 4 Derek Bridges Preliminary Design
Suspensions
06 Nov 2009
E0900368-v1 Traveler for HLTS Prototype Parts - Batch 5 Derek Bridges Preliminary Design
Suspensions
06 Nov 2009
E0900390-v1 Traveler for HLTS Prototype Parts - Batch 6 Derek Bridges Preliminary Design
Suspensions
06 Nov 2009
E0900395-v1 Traveler for HLTS Prototype Parts - Batch 7 Derek Bridges Preliminary Design
Suspensions
06 Nov 2009
E0900302-x0 DCN - HLTS Magnet Placement Fixtures Derek Bridges Preliminary Design
Change Control
Suspensions
21 Oct 2009
D0902335-v1 Plunger/Gripper Assembly Derek Bridges Preliminary Design
Suspensions
21 Oct 2009
D0902070-x0 Standoff Side Bracket, Magnet Placement Fixture, Test Mass, HLTS Derek Bridges Preliminary Design
Suspensions
15 Sep 2009
D0902067-x0 Pressure Bracket, Magnet Placement Fixture, Test Mass, HLTS Derek Bridges Preliminary Design
Suspensions
15 Sep 2009
E0900243-x0 DCN - AOSEM Alignment and Mounting Brackets Derek Bridges Preliminary Design
Change Control
Suspensions
11 Sep 2009
E0900277-x0 DCN - Updated HLTS Test Mass Parts and Assembly, Lower Loop Wire Parts, Jig, and Assembly, and Intermediate Mass Assembly Derek Bridges Preliminary Design
Change Control
Suspensions
11 Sep 2009
D0901544-v1 Cable Clamp Liner, 40-Meter Cable Clamp Derek Bridges Preliminary Design
Suspensions
04 Sep 2009
D010120-v1 40-Meter Cable Clamp Derek Bridges Preliminary Design
Suspensions
04 Sep 2009
D0901547-v1 Top Plate, 40-Meter Cable Clamp Derek Bridges Preliminary Design
Suspensions
04 Sep 2009
D0901545-v1 Base Plate, 40-Meter Cable Clamp Derek Bridges Preliminary Design
Suspensions
03 Sep 2009
E0900239-x0 DCN - HLTS Updated Drawings (Upper Wire and Upper Blade Bake Fixture) Derek Bridges Preliminary Design
Change Control
Suspensions
14 Aug 2009
E0900205-x0 DCN - HLTS Lower Loop Wire Jig Derek Bridges Preliminary Design
Change Control
Suspensions
10 Aug 2009
E0900232-x0 DCN - HLTS Test Mass and Related Parts Derek Bridges Preliminary Design
Change Control
Suspensions
05 Aug 2009
E0900129-x0 DCN - Rounded SHCS Derek Bridges Change Control
System Engineering
03 Aug 2009
E0900221-x0 DCN - HLTS Coil Holder (Tablecloth) Assembly and Parts Derek Bridges Preliminary Design
Change Control
Suspensions
03 Aug 2009
E0900204-x0 DCN - HLTS Intermediate Wire Jig Derek Bridges Preliminary Design
Change Control
Suspensions
03 Aug 2009
D0900997-v1 Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.5 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
29 Jul 2009
E0900189-x0 DCN - HLTS Test Mass Assembly Parts (and HLTS Intermediate Mass Main Section) Derek Bridges Preliminary Design
Change Control
Suspensions
28 Jul 2009
E0900176-x0 DCN - HLTS Assembly Drawings Derek Bridges Preliminary Design
Change Control
Suspensions
27 Jul 2009
E0900220-x0 DCN - OSEM Magnet and Flag Assembly Derek Bridges Suspensions
27 Jul 2009
E0900198-x0 DCN - HLTS Upper Mass Parts Derek Bridges Preliminary Design
Change Control
Suspensions
24 Jul 2009
E0900213-x0 DCN - Magnet Holder (OMC SUS, HLTS) Derek Bridges Preliminary Design
Change Control
Suspensions
22 Jul 2009
D020608-v1 X-Direction Offset, T-Piece, Upper Mass, HLTS Derek Bridges Preliminary Design
Suspensions
21 Jul 2009
E0900193-x0 DCN - HLTS Lower Loop Wire Parts Derek Bridges Preliminary Design
Change Control
Suspensions
20 Jul 2009
E0900207-v1 Traveler for HLTS Structural Weldment (D070442) Prototype Derek Bridges Preliminary Design
Suspensions
17 Jul 2009
E0900184-x0 DCN - HLTS Intermediate Wire Parts Derek Bridges Preliminary Design
Change Control
Suspensions
07 Jul 2009
E0900173-x0 DCN - HLTS Intermediate Mass Parts Derek Bridges Preliminary Design
Change Control
Suspensions
07 Jul 2009
E080337-v1 Drawing Tree - OMC SUS (LHO) Overall Assembly and Fixtures Derek Bridges Suspensions
Basic R&D
25 Jun 2009
E0900162-x0 DCN - HLTS Earthquake Stop Mounts and Assemblies Derek Bridges Preliminary Design
Change Control
Suspensions
19 Jun 2009
E0900166-x0 DCN - HLTS Upper Blade Bake Fixture Derek Bridges Preliminary Design
Change Control
Suspensions
11 Jun 2009
D070558-v1 Side Support, Upper Blade Bake Fixture Derek Bridges Preliminary Design
Suspensions
11 Jun 2009
E080427-v1 DCN - As-Built Drawings for OMC Suspensions Derek Bridges Change Control
Suspensions
09 Jun 2009
E0900160-x0 DCN - HLTS Upper Wire Assembly and Upper Wire Jig Derek Bridges Preliminary Design
Change Control
Suspensions
08 Jun 2009
E0900159-x0 DCN - HLTS Top Blade Guard Derek Bridges Preliminary Design
Change Control
Suspensions
04 Jun 2009
D0900897-v1 Earthquake Stop for Glass (No Glass Tip), Simplified, 2 Inch Derek Bridges Final Design
Suspensions
21 May 2009
E0900152-x0 DCN - Earthquake Stops Derek Bridges Preliminary Design
Change Control
Suspensions
21 May 2009
E0900066-x0 DCN - HAM Large Triple Suspension Nonsuspended Hardware Derek Bridges Change Control
Suspensions
Basic R&D
21 May 2009
E0900155-x0 DCN - HLTS Lower Blade Library of Clamps Derek Bridges Preliminary Design
Change Control
Suspensions
21 May 2009
E0900154-x0 DCN - HLTS Upper Blade Library of Clamps Derek Bridges Preliminary Design
Change Control
Suspensions
19 May 2009
E0900065-x0 DCN - HAM Large Triple Suspension Suspended Hardware Derek Bridges Change Control
Suspensions
Basic R&D
15 May 2009
D0901025-x0 Cap, Resin, Earthquake Stop Derek Bridges Preliminary Design
Suspensions
15 May 2009
D0901019-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.75 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901018-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.5 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901017-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.25 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901016-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 1 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901015-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.75 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901014-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.5 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901013-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.25 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901022-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 2.5 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901021-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 2.25 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901012-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 1.5 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901011-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 1.25 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901010-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 0.75 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901009-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 0.5 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901008-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 0.25 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901007-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 0.1875 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901005-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.4375 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901004-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.375 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901003-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.3125 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901002-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.25 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901001-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.1875 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0901000-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.125 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges Final Design
System Engineering
13 May 2009
D0900998-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.75 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900996-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.25 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900995-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.75 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900994-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.5 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900993-x0 Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.25 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900992-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 2 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900989-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 1.25 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900988-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 1 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900987-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 0.75 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900986-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 0.5 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900985-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 0.375 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900984-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 0.25 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900983-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 0.1875 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900982-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.5 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900981-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.4375 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900979-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.3125 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900978-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.25 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900977-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.1875 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D0900976-x0 Screw, Socket Head Cap, #4-40 UNC-2A X 0.125 Long, Fully Threaded, Rounded End Derek Bridges Final Design
System Engineering
13 May 2009
D030027-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 2 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges et al. Fabrication
Document Migration
System Engineering
08 May 2009
D030026-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 1.75 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges et al. Fabrication
Document Migration
System Engineering
08 May 2009
D030024-x0 Screw, Socket Head Cap, #8-32 UNC-2A X 0.375 Long, Fully Threaded, Rounded End, Ag-Plated Derek Bridges et al. Fabrication
Document Migration
System Engineering
08 May 2009
D0900907-x0 Earthquake Stop for Glass, Simplified Derek Bridges Preliminary Design
Suspensions
06 May 2009
D060456-x0 Impact Absorber, Earthquake Stop Derek Bridges et al. Preliminary Design
Document Migration
Suspensions
06 May 2009
D070360-x0 Mounting Bracket, Left, Coil Holder, HLTS Derek Bridges Preliminary Design
Suspensions
30 Apr 2009
D020687-v1 Upper Blade Clamp, Lower Side, 3.0 Degree Derek Bridges Final Design
Suspensions
24 Apr 2009
D020688-v1 Upper Blade Clamp, Lower Side, 3.5 Degree Derek Bridges Final Design
Suspensions
24 Apr 2009
D070031-v1 Lower Blade Clamp, Upper Side Derek Bridges Final Design
Suspensions
23 Apr 2009
D0900637-v1 Self-Clinching Nut Test Assembly Derek Bridges Suspensions
Basic R&D
15 Apr 2009
D0900636-v1 Self-Clinching Nut Test Piece Derek Bridges Suspensions
Basic R&D
13 Apr 2009
E080446-v1 DCN - HAM Large Triple Suspension Structure Derek Bridges Fabrication
Suspensions
03 Apr 2009
G0900106-v1 HAM Suspensions Update - LSC/Virgo Collaborations Meeting, March 16-29, 2009 Derek Bridges Meeting
Suspensions
19 Mar 2009
E080186-x0 Document Change Notice (DCN) - OMC Assembly Drawings Derek Bridges Document Migration
16 Dec 2008
E080195-x0 Document Change Notice (DCN) - OMC Assembly Drawings/Rounded SHCS Derek Bridges Document Migration
16 Dec 2008

Number of documents found: 556


DCC Version 3.4.3, contact Document Database Administrators