Initial Alignment Procedure - LBSC2 As Built

Document #:

LIGO-E1200392-v9

Document type:

E - Engineering documents

Abstract:

This is the procedure for the initial alignment of the Livingston BSC2. This document describes the necessary equipment and procedures for setting the initial positions and the angular alignments of the principal optics both for the cartridge installation on the test stand and the later installation of the cartridge into the chamber.

Files in Document:

• E1200392-v9 LBSC2 initial alignment procedure as built.pdf (867.9 kB)

Other Files:

• E1200392-v9 LBSC2 initial alignment procedure as built.docx (4.4 MB)

Topics:

• Installation

Authors:

• Jason Oberling
• Douglas Cook
• Dennis Coyne
• Eric James
• Joe Hanson
• Gary Traylor

Keywords:

Initial alignment procedure LBSC2

Notes and Changes:

10/3/2014 J. Oberling: Fixed various format and cross reference issues.

20/11/2013 J. Oberling: Since this alignment is complete the As Built document is getting its own version.

Updated to reflect alignment procedure as performed on LBSC2
Added As Built document

Related Documents:

• LIGO-T080307: Initial Alignment System (IAS) Design Requirements Document (DRD)
• LIGO-E1200329: aLIGO Chamber (Top Level) Installation Procedure: LBSC2
• LIGO-E1200556: aLIGO IAS LBSC2 Alignment Solutions
• LIGO-D1200869: aLIGO IAS LLO Monuments
• LIGO-E1100690: Initial Alignment Procedure - WBSC8 As Built
• LIGO-E1100782: Initial Alignment Procedure -LHAM1
• LIGO-E1100783: Initial Alignment Procedure - LHAM2 and LHAM3 As Built
• LIGO-E1100784: Initial Alignment Procedure - LHAM4 and LHAM5 As Built
• LIGO-E1101071: Initial Alignment Procedure - WBSC6 As Built
• LIGO-E1101072: Initial Alignment Procedure -LHAM6
• LIGO-E1200393: Initial Alignment Procedure - LBSC3 As Built
• LIGO-E1200795: Initial Alignment Procedure - WBSC2 As Built
• LIGO-E1200956: Initial Alignment Procedure - LBSC4 As Built
• LIGO-E1200957: Initial Alignment Procedure - LBSC5 As Built