TransMonSUS Assembly & Installation Procedure

Document #:

LIGO-E1201012-v8

Document type:

E - Engineering documents

Abstract:

This document describes the assembly and installation procedure for the TransMonSus (TMS)

PENDING REVISION
I am not sure that the message ever made it to you guys from Ken Mailand (from 2 years ago or more), but Gerardo noted that we are not suppose to lift the TMS telescope units from the Invar connecting bars. Apparently they can bend - I recall they are a specific SST, not 300 series. Betsy and Gerardo.

Files in Document:

• E1201012-v8_TMS_TEL_Assy_Install_Procedure.pdf (20.7 MB)

Other Files:

• E1201012-v8_TMS_TEL_Assy_Install_Procedure.docx (29.7 MB)

Topics:

• Auxiliary Optics
• Final Design
• Sensing and Control

Authors:

• Ken Mailand
• Lisa Austin
• Michael Smith
• Keita Kawabe
• Craig Conley
• Bram Slagmolen

Keywords:

TMS Transmon AOS

Notes and Changes:

Added more dimensions to establish tele beam to Table Distance with tolerance pages 161 & 162
Changed earth quake restraint safety chain link to pear shape
from oval due to fit issue pages 150 & 156

Related Documents:

• LIGO-E1100537: TRANSMISSION MONITOR TELESCOPE SUSPENSION (TMS) FINAL DESIGN
• LIGO-T1300639: TMS Primary Mirror Installation Procedure

Referenced by:

• LIGO-E1100841-v1: TMS Transportation-Installation Restraint Procedure
• LIGO-D1300670-v1: Distance of TMS Telescope Input Beam from Cartridge Table
• LIGO-T1100304: TMS ASSEMBLY and ALIGNMENT DOCUMENTATION
• LIGO-T1000311-v7: aLIGO TransMonSUS Assembly & Installation Hazards Analysis
• LIGO-D1101064-v6: Tooling for the ETM Transmission Monitor System (TMS)
• LIGO-D0901880-v5: aLIGO AOS SUS Transmission Monitor System (TMS, TMTS) Assembly