Preparation of a thermal compensation plate (TCP) or end reaction mass (ERM) (Gluing wire break-off prisms and earthquake stops)

Document #:

LIGO-E1000752-v5

Document type:

E - Engineering documents

Abstract:

This document describes the procedure for gluing the wire break-off prisms and earthquake stops to the TCP or ERM

Files in Document:

• E1000752-v5.pdf (484.3 kB)

Other Files:

• E1000752-v5.docx (177.6 kB)
• E1000752-v5.pdf (484.3 kB)
• e-mail chains with E1000752.pdf (34.4 kB)

Topics:

• Installation
• Suspensions

Authors:

• Margot Hennig
• Marielle van Veggel
• Russell Jones
• Michael Meyer
• Betsy Weaver
• Liam Cunningham
• Mark Barton

Keywords:

aLIGO SUS TCP ERM wire-break off prisms

Notes and Changes:

-v5 (Mark Barton) - Deleted step on removing First Contact during final airbake. Added references to T1300322 for up-to-the-minute gluing guidance.

Related Documents:

• LIGO-D1000980: aLIGO, TCP OPTICS WITH PRISM ASSEMBLY
• LIGO-D1000979: D1000979_ALIGO, COC TCP (THIN COMPENSATION PLATE) SUBSTRATE
• LIGO-D080750: aLIGO SUS ERM/TCP Wire Break-off Prism
• LIGO-D1002140: aLIGO TCP Prism bonding jig
• LIGO-D080116: End Reaction Mass (ERM)
• LIGO-D1002201: aLIGO ERM Prism bonding jig
• LIGO-E1200821: Guidelines for use in de-bonding of epoxy bonds from optics

Referenced by:

• LIGO-E1200821-v2: Guidelines for use in de-bonding of epoxy bonds from optics
• LIGO-T1000337-v4: Quadruple Suspension Monolithic Stage Final Design