aLIGO TCP Prism bonding jig

Document #:

LIGO-D1002140-v2

Document type:

D - Drawings

Abstract:

This document currently holds an e-drawing of the TCP prism bonding jig as a placeholder, while drawings are being prepared.

Files in Document:

• D1002140-v2_aLIGO_TCP_PRISM_BONDING_JIG.pdf (155.1 kB)

Other Files:

• D1002140-v2_aLIGO_TCP_PRISM_BONDING_JIG.EASM (589.4 kB)

ICS/JIRA Record:

• ICS_LINK

Topics:

• Installation
• Suspensions

Authors:

• Marielle van Veggel
• Russell Jones
• Michael Meyer

Notes and Changes:

v1: for review
v2: changes to micrometer and spring plunger contact points, material removed to enable repair scenario with face (EQ) stops in place. (R.JONES, 23/11/2010)

Related Documents:

• LIGO-D1002141: aLIGO TCP Prism bonding fixture
• LIGO-D1002142: aLIGO TCP Prism bonding baseplate
• LIGO-D1002143: aLIGO TCP Prism bonding alignment guide
• LIGO-D1002144: aLIGO TCP Prism bonding support cylinder
• LIGO-D1002145: aLIGO TCP/ERM Prism holder assembly
• LIGO-D1002146: aLIGO TCP/ERM Prism holder
• LIGO-D1002289: aLIGO TCP/ERM Prism holder alignment screw
• LIGO-D1002290: aLIGO TCP/ERM Prism holder alignment bush
• LIGO-D1002291: aLIGO TCP/ERM Prism holder fixing screw

Referenced by:

• LIGO-E1000752-v5: Preparation of a thermal compensation plate (TCP) or end reaction mass (ERM) (Gluing wire break-off prisms and earthquake stops)