Addendum to E0900042 aLIGO OMC Hazard Analysis

Document #:

LIGO-E1300537-v1

Document type:

E - Engineering documents

Abstract:

This addendum allows the optional use of a lift table in conjunction with people lifting/sliding the OMC up and into position in HAM 6. This is in lieu of using the HAM Installation Arm as described in the E0900042 Hazard Analysis.

Files in Document:

• E1300537-v1 Addendum to E0900042 aLIGO OMC Hazard Anal...pdf (112.7 kB)

Other Files:

• E1300537-v1 Addendum to E0900042 aLIGO OMC Hazard Ana...docx (204.0 kB)

Topics:

• Safety
• Installation
• Suspensions
• Sensing and Control

Authors:

• Jeffrey Lewis

Keywords:

OMC Hazard Analysis Addendum

Notes and Changes:

This plan was discussed and approved in a meeting at LLO on 13 June 2013 with Brian O'Reilly, Richard Oram, David Nolting, Koji Arai, and Jeff Lewis. This approach was alos approved by Systems Engineering (Dennis Coyne & Calum Torrie) and the aLIGO project leader, David Shoemaker.

Related Documents:

• LIGO-E0900042: AdvLIGO Output Mode Cleaner Suspension Hazard Analysis

Referenced by:

• LIGO-E1300897: aLIGO, SUS, OMCS
• LIGO-E1300429: aLIGO SUS OMCS Assembly and Installation Documentation
• LIGO-E070271-v2: OMCS Installation Procedure
• LIGO-E1500006: aLIGO, ISC, OMC, Design, General, Installation Documents