Generic Requirements & Standards for Detector Subsystems
- Document #:
- LIGO-E010613-v2
- Document type:
- E - Engineering documents
Other Versions:
| LIGO-E010613-v1
29 Jan 2010, 16:47 |
| LIGO-E010613-x0
13 May 2009, 11:44 |
- Abstract:
- The intent of this document is to provide a common set of guidelines, standards and requirements for the LIGO Detector (science instrument). Since this document has been written after the Initial LIGO construction phase, it applies to new designs (Advanced LIGO (AL) and Initial LIGO (IL) upgrades) but is not retroactive in scope. The scope of this document is principally on the engineering and implementation requirements and not the performance requirements.
Each AL Detector subsystem, or major IL upgrade project, should write a set of requirements which call out the provisions in this document which apply, or state how and why a deviation from these requirements is needed.
- Files in Document:
- Other Files:
- E010613-v2 Generic Requirements and Standards.docx (435.2 kB)
- earthquake_design_spectra.xls (90.5 kB)
- Authors:
- Notes and Changes:
- corrected the default proof test level in section 3.4.4.1.1
approved by D. Coyne 1/4/2012 Needs revision to cite newer detailed requirements documents such as E0900364
- Related Documents:
- LIGO-M050303: Advanced LIGO Project Execution Plan
- LIGO-M070102: M070102 Advanced LIGO Change Control Procedure
- LIGO-M050220: Guidelines for Advanced LIGO Detector Construction Activities
- LIGO-M960076: LIGO Quality Assurance Plan
- LIGO-E030350: Configuration Control & Drawing Requirements
- LIGO-E030647: Advanced LIGO Detector System Interface Control Document (ICD)
- LIGO-T980044: Determination of Global and Local Coordinate Axes for the LIGO Sites
- LIGO-E960022: LIGO Clean and Bake Methods and Procedures
- LIGO-E960050: LIGO Vacuum Compatible Materials List
- LIGO-T010074: The LIGO Observatory Environment
- LIGO-D950148: LVEA and VEA Foundations Relative to the Beam Tube Center Line
- LIGO-M1200366: Guidance and format for writing an “Operation Manual” (aka “User’s Manual” or “Operator’s Manual”)
- LIGO-E950111: LIGO Naming Conventions
- Referenced by:
- LIGO-E1400258-v3: Contamination Control Mitigation Processes and the resulting Cleanliness Levels
- LIGO-E1000088-v1: Qualifying Parts for LIGO UHV Service
- LIGO-E1101226-v3: Proof Test Levels for Advanced LIGO Viewports
- LIGO-E0900480-v6: FTIR Testing to Qualify Parts for LIGO UHV Service
- LIGO-T040111-v1: Galling Tendencies and Particles Produced by Ultra Clean Screw Threads
- LIGO-E1300945: aLIGO, System Requirements