Flange Layout - H1 Horizontal Access Module1 (HAM 1)

Document #:

LIGO-D1002872-v7

Document type:

D - Drawings

Abstract:

This layout shows the flange type (A, B, C etc) used for the HAM chambers their position relative to the chamber and the connectors. It also lists the equipment that passes through each flange.

USEFUL LINKS
1) For aid with orientation of chamber and location of flanges on chamber, refer to AdvLIGO VE HAM4-H1, Vacuum Equipment Assembly, LIGO-D0901126

2) For a Summary of electrical feedthrough types and typical sub-flanges refer to LIGO-D1101775: aLIGO, ELECTRICAL FEEDTHROUGH TYPES, TYPICAL SUBFLANGES, AND PORT CONFIGURATIONS

3) Refer to LIGO-D1002892 (linked below) for the Flange Master Listing Summary

Files in Document:

• D1002872-v7.PDF (413.5 kB)

ICS/JIRA Record:

• d1002872

Topics:

• System Engineering
• Preliminary Design

Authors:

• Emery Brown
• Calum Torrie
• Eduardo Sanchez

Keywords:

HAM flange

Notes and Changes:

Updated to reflect as built config. as follows:

Swapped purge air port with TT mirrors:

D4-3C1 & D4-C2 was: PURGE AIR PORT
D5-3 was: TIP-TILT Mirrors

D2 flange inaccessible:

Beam blockers relocated from D2-1 to D1-1

Related Documents:

• LIGO-D1002892: aLIGO Flange Layout Document v14
• LIGO-D0901820: AdvLIGO VE HAM1-H1 Vacuum Equipment Assembly
• LIGO-D1101775: aLIGO, ELECTRICAL FEEDTHROUGH TYPES, and TYPICAL SUBFLANGES

Referenced by: