aLIGO VOPO Oven

Document #:

LIGO-D1500300-v3

Document type:

D - Drawings

Abstract:

This oven is designed to be attached on the VOPO cavity aluminum breadboard.

It uses a single axis translation stage.

The bracketry will provide 4 additional degrees of freedom during the assembly process (2 translations, pitch and yaw)

Two preliminary versions have been studied: one with a heater, and one with a Peletier. The version with the Peletier has been retained.

A final version has been designed after the Preliminary Design Review with the goal of minimizing the thermal load, and improved during the Final Design Review.

Files in Document:

• D1500300-v3 aLIGO VOPO Oven.pdf (174.7 kB)

Other Files:

• B57541G1103F000 Spec Sheet of item number 8 in the main drawing (B57541G1103F000.pdf, 1.5 MB)

ICS/JIRA Record:

• d1500300

Topics:

• Squeezer
• Basic R&D

Authors:

• Fabrice Matichard
• Peter Fritschel
• John Miller
• Lisa Barsotti
• Alvaro Fernandez-Galiana

Notes and Changes:

1) The Materials and C&B procedure for these parts are summarized in sec 4.2 of E1500384.
2) Spec sheet for B57541G1103F000, item number 8 in the main drawing is also attached in other files.

Related Documents:

• LIGO-E1700369: aLIGO VOPO Oven, Assembly procedure
• LIGO-D1600117: aLIGO VOPO Oven Bracket Assembly
• LIGO-D1600066: Pelletier Bottom Bracket
• LIGO-D1600064: Oven Peek Cap
• LIGO-D1600067: Copper Support
• LIGO-D1500086: VOPO Oven Remote Controlled Translation Stage
• LIGO-D1700139: aLIGO VOPO Oven Threaded Bushing

Referenced by:

• LIGO-E1600171: aLIGO, SQZ, VOPO Cavity