LIGO Document T2600342-v1

Quantum noise lock optimization for tabletop Waveguided Optical Parametric Amplification (WOPA)

Document #:
LIGO-T2600342-v1
Document type:
T - Technical notes
Other Versions:
Abstract:
The Laser Interferometer Gravitational-Wave Observatory (LIGO) detectors' sensitivity is affected by various noise
sources, including quantum noise. LIGO currently reduces this noise using frequency dependent squeezing generated by an Optical Parametric Oscillator (OPO) with active cavity locking. To simplify the setup, this project uses a waveguide Periodically Poled Lithium Niobate (PPLN) crystal to generate squeezing without requiring cavity locking. To observe squeezing, the squeezed vacuum is combined with a Local Oscillator (LO) at a 50/50 beam splitter and detected by two photodetectors in a Balanced Homodyne Detection (BHD) configuration. By using a Piezoelectric Transducer (PZT)-actuated mirror, the LO phase is adjusted to measure both squeezed and anti-squeezed quadratures. Quantum Noise Locking (QNL) stabilizes the relative phase between the LO and squeezed vacuum to enable an accurate squeezing measurement. The objective of this project is to optimize the QNL feedback loop to minimize residual phase noise. This is achieved by generating stronger error signals, applying control loop filters, and calibrating overall loop gain for stable feedback performance. Additional measurements were conducted for this experiment, such as photodetector noise and response characterization, along with design modeling of optimal photodetector dynamics for future squeezing measurements in LIGO s audio detection band.
Keywords:
WOPA SURF26
Referenced by:

DCC Version 3.6.0, contact DCC Help