Altiumcustomize

Design Rule Verification Report

Date : 6/22/2012
Time : 5:13:53 PM
Elapsed Time : 00:00:01
Filename : C:\Rich's Files\Mycadfiles\ISC\Laser Calibrator\LaserCal.PcbDoc
Warnings : 0
Rule Violations : 1

Summary

Warnings Count
Total 0

Rule Violations Count
Short-Circuit Constraint (Allowed=No) (All),(All) 0
Un-Routed Net Constraint ( (All) ) 0
Clearance Constraint (Gap=10mil) (All),(All) 0
Power Plane Connect Rule(Relief Connect )(Expansion=20mil) (Conductor Width=10mil) (Air Gap=10mil) (Entries=4) (All) 0
Width Constraint (Min=10mil) (Max=100mil) (Preferred=20mil) (All) 0
Height Constraint (Min=0mil) (Max=1000mil) (Prefered=500mil) (All) 0
Hole Size Constraint (Min=1mil) (Max=200mil) (All) 0
Hole To Hole Clearance (Gap=10mil) (All),(All) 0
Minimum Solder Mask Sliver (Gap=10mil) (All),(All) 1
Silkscreen Over Component Pads (Clearance=5mil) (All),(All) 0
Silk to Silk (Clearance=6mil) (All),(All) 0
Net Antennae (Tolerance=0mil) (All) 0
Room LaserCal (Bounding Region = (7380mil, 1640mil, 7415mil, 1670mil) (Disabled)(InComponentClass('LaserCal')) 0
Total 1

Minimum Solder Mask Sliver (Gap=10mil) (All),(All)
Pad U2-1(0mil,39.37mil) Multi-Layer Pad U2-2(39.37mil,0mil) Multi-Layer
Back to top