customize| Date | : | 5/9/2012 |
| Time | : | 8:43:44 AM |
| Elapsed Time | : | 00:00:00 |
| Filename | : | C:\Rich's Files\Mycadfiles\ISC\Laser Calibrator\LaserCal.PcbDoc |
| Warnings | Count |
|---|---|
| Total | 0 |
| Room LaserCal (Bounding Region = (7380mil, 1640mil, 7415mil, 1670mil) (Disabled)(InComponentClass('LaserCal')) |
|---|
| Net Antennae (Tolerance=0mil) (All) |
|---|
| Silk to Silk (Clearance=6mil) (All),(All) |
|---|
| Silkscreen Over Component Pads (Clearance=5mil) (All),(All) |
|---|
| Minimum Solder Mask Sliver (Gap=10mil) (All),(All) |
|---|
| Hole To Hole Clearance (Gap=10mil) (All),(All) |
|---|
| Hole Size Constraint (Min=1mil) (Max=200mil) (All) |
|---|
| Height Constraint (Min=0mil) (Max=1000mil) (Prefered=500mil) (All) |
|---|
| Width Constraint (Min=10mil) (Max=100mil) (Preferred=20mil) (All) |
|---|
| Power Plane Connect Rule(Relief Connect )(Expansion=20mil) (Conductor Width=10mil) (Air Gap=10mil) (Entries=4) (All) |
|---|
| Clearance Constraint (Gap=10mil) (All),(All) |
|---|
| Un-Routed Net Constraint ( (All) ) |
|---|
| Short-Circuit Constraint (Allowed=No) (All),(All) |
|---|